Quick answer: Check the rack system and the exact mounting position before ordering an FJ Cruiser bracket. The listing offers 2-piece and 6-piece sets, but those are pack quantities, not proof of how many brackets your vehicle uses. Match the part and count the confirmed replacement positions first.
If you're shopping for a Toyota FJ Cruiser roof rack bracket, the first question is whether you need a replacement mount component or a different rack's fitting kit. A vehicle year or a part number in a product title is only a starting point, especially if a previous owner changed the rack.
Two people can own the same year FJ and need different parts: one may still have the factory rack, while the other has an aftermarket platform on a dedicated fitting kit. Use the rack fitted today as your starting point. If you can see damaged roof metal, movement at the roof attachment or a bolt that turns without releasing, have the mount assessed before choosing a replacement pack.
Match the part, not just the model name
Toyota's US parts catalogue identifies 63187-35020 as a roof-rack bracket reference and asks buyers to check vehicle fit. It does not identify the hardware on your Australian-delivered vehicle or import, and it does not independently verify the stock on our product page.
Use that number to start the enquiry. Compare the shape, hole layout, any moulded markings and the position on the rack. If you have an aftermarket platform or crossbars, follow the rack brand's own fitting-kit diagram rather than matching by vehicle alone.
Identify the bracket by position and contact faces
The US Toyota catalogue labels 63187-35020 as a rear roof rack bracket. Treat that description as a reason to verify the position, particularly when the damaged part is at the front or middle. A similar silhouette in a listing photo does not establish that the underside, bush location or load-bearing contact face is the same.
- Map the position on the vehicle. Mark left or right from the driver’s forward-facing viewpoint, then front, middle or rear as applicable. Avoid “driver’s side” on its own when sharing photos of an import.
- Compare the same surfaces. Photograph the rack-facing side, the roof-facing side if the part is already accessible, and any readable marking. Note whether the existing piece has an isolator, lip or step where it meets the rack.
- Record dimensions where accessible. If you can safely access the part, note centre-to-centre hole spacing, overall width and any stepped section in millimetres. Keep the ruler in the same plane as the feature and include a straight-on photo to reduce perspective error. Leave inaccessible dimensions blank rather than lifting the rack just to get a measurement.
If an old bracket is broken or distorted, photograph an intact reference position as well, labelling where it came from. Use it as a comparison only; the opposite side may use a different profile or orientation.
2-piece or 6-piece: choose by confirmed positions
Swipe sideways to read the full table on a small screen.
| Your job | What to check or choose |
|---|---|
| Two matching replacement brackets, both positively identified | Check the 2-piece option and ask whether the two positions use the same piece. |
| Several brackets need replacement | Map each position and compare the verified quantity with the 6-piece option. Confirm what the pack covers before ordering. |
| Rack kit, mounting position or hardware still unknown | Send photos and the rack label first. A larger pack does not resolve a mismatch. |

The EVparts4x4 bracket listing describes a 2-piece set with isolator bushings and shows a 6-piece option. Its pack description and fitting notes use different counts. Confirm how many individual brackets your rack needs and whether any fasteners, retainers or seals must be sourced separately. Do not use a bolt-hole count as a parts count.
Worked example: two damaged corners, two different findings
The shop page offers a six-piece pack, while its fitting text refers to eight positions. Those numbers cannot tell you which components are used at each position. Use the parts diagram for your rack and ask for the piece count and coverage of the exact variant.
Suppose the left rear bracket is cracked and the right rear foot also looks uneven. If both brackets are the same confirmed part and both roof attachments are sound, a pair is the logical option to check. If one bracket is intact and the problem on that side is a loose roof fixing or a failed seal, buying two brackets does not solve both jobs. Confirm the second fault before choosing the pack.
Get the contents for the selected variant in writing. Ask whether all pieces have the same reference, whether the bushes come fitted and what bolts, seals or retainers are supplied. A variant labelled “full set” does not tell you which positions it covers on your particular rack.
Choose the right ordering route for your rack
Swipe sideways to read the full table on a small screen.
| Existing setup | Evidence to send | Best next step |
|---|---|---|
| Factory rack with a readable part reference | Build month and market, exact position, the part marking and photos of the contact faces. | Confirm each position against a parts diagram or with the supplier before picking the pack. |
| Identified aftermarket rack or platform | Brand, model, fitting-kit code and the diagram showing the foot or pad. | Start with the rack maker’s parts list. Use the Toyota-reference bracket only if the documentation supports that interface. |
| Unlabelled rack or mixed hardware | Wide photo, front-to-rear position labels and close-ups of the feet and fixings. | Ask a fitter to identify the system. Leave the pack unselected while the interface is unknown. |
A model-year range helps narrow the enquiry. It cannot tell you whether a previous owner fitted a different rack or whether Toyota uses the same part at several positions. If a dealer needs your VIN to look up the factory diagram, pass it through a private enquiry rather than posting it in a public photo.
Send these details before you order
- Vehicle build month and year, and whether it is Australian-delivered or imported.
- Factory rack or aftermarket; include the rack and fitting-kit label if available.
- A wide roof photo, a close-up of the affected mount and any visible part marking. Mark the side and position.
- The number of positions you want to replace. Ask which bracket, pack and hardware go with each one.
For a useful reply, list the positions on one line and the question on the next: “Which reference goes in each position, and which pack includes those parts?” A reply that confirms only the vehicle year still leaves the positions unresolved. Ask for a labelled pack photo or parts list if the answer does not identify the supplied pieces.
Next step: Ask us to confirm bracket fitment. Once you have a match, check the 2- and 6-piece bracket options, select the confirmed pack and check the Australian price and delivery to your postcode. If you identify an aftermarket fitting kit with a different interface, order the rack maker's specified parts instead.
Bracket fitment FAQ
Is this a complete roof rack or crossbar kit?
No. It is a replacement bracket listing. Do not assume the rack, legs, bars or installation hardware are supplied with the bracket pack.
Does the 6-piece option cover every mounting position?
Only if the seller confirms that pack matches the positions on your rack. The six refers to the pack quantity, and the fitting notes use a different count.
Will these brackets fit my aftermarket rack?
Check the rack's fitting-kit instructions and part diagram. Sharing a roof mounting area does not make the individual brackets, bolt lengths or seals interchangeable.
Can I order by Toyota part reference 63187-35020 alone?
Use the reference together with the vehicle build details, rack identity and confirmed mounting position. Ask for written fitment confirmation if any of those checks is inconclusive.