Quick answer: For an Australian right-hand-drive Model 3, confirm three things before picking a floor-mat variant: the car’s build and refresh version, a right-side driver mat for that footwell, and how the mat is secured. The Model 3 variants on our multi-model listing do not identify a separate RHD or Highland fit. Ask us to confirm the exact option before ordering.
If you have a Model 3 registered in 2024 and a listing says “2017–2026”, you still need to know whether the supplier means the earlier cabin, the refreshed cabin often called Highland, or both. The same principle applies to an Australian-delivered car and an import. Ask for the pattern for the physical car you own.
1. Identify your Model 3 before comparing variants
Use the available build information and vehicle records to identify the car. Tesla provides separate Australian manuals for the 2017–2023 Model 3 and the 2024+ Model 3; those headings are useful when describing the earlier or refreshed car. They do not show whether any aftermarket mat fits across both generations.
- Build and refresh: give the build month and year if you have them, then say “earlier Model 3” or “refreshed Model 3 / Highland” if you know which it is.
- Drive side: state that the steering wheel and pedals are on the right. If the car was imported, add its original market if known.
- Driver’s footwell: while parked, lift out the existing removable mat and take a photo that shows the carpet, pedals, footrest and any visible retention points. Leave fixed carpet and trim in place.
Buying for an earlier car first registered in 2024? Give both dates if available and explain why they differ. If you are unsure which version you own, let the footwell photo and build details lead the enquiry. Do not choose a 2024+ set based only on the registration year.
Take two photos that show the fit

Start with a wide shot from the open driver’s door. Show the right-hand driving position, pedals and both edges of the footwell. Take a second, closer shot of the carpet where the mat sits, including any clips, anchors or other visible retention points.
If the car already has a mat, turn the removed mat over and photograph its underside or part label separately. That helps the supplier identify what came out of the car, but the bare footwell still matters if the previous mat was the wrong pattern.
2. Ask for proof of the driver-side pattern
A stock image may show the mat on the wrong side or use the same image for several markets. Ask to see the actual right-side driver mat for the proposed variant, including its underside. Check where it narrows near the pedals and whether the retention method matches your car.
Swipe sideways to read the full table.
| Check | Useful confirmation | When to pause |
|---|---|---|
| Earlier vs refreshed Model 3 | The confirmed variant or part number is linked to your build and refresh. | The reply only repeats the year range from the listing. |
| Right-side driver’s mat | A photo or product drawing for the actual RHD variant identifies the pedal and footrest side. | The seller sends a generic photo or points only to the drive-side selector. |
| Retention | The supplier explains how the driver mat for that variant is held in your carpet or anchor layout. | The reply says clips are included “if applicable”, without identifying their use for your option. |
The listing names Model 3 in its compatibility range, but still asks buyers to verify exact compatibility. It also gives a Model Y fitment example; that example does not establish an RHD or Highland Model 3 fit. Use written confirmation that identifies your variant and the driver’s footwell.
Worked example: when a fitment reply is specific enough
Say you have a right-hand-drive car first registered in 2024, but your records identify it as the earlier Model 3. A reply that just says “fits 2017–2026” leaves both the refresh and driver-mat pattern unclear. Ask for the exact variant that fits the earlier RHD footwell before ordering.
For a confirmed Highland, ask the same question for the refreshed RHD footwell. A useful reply names the exact orderable variant, shows the right-side driver mat and its underside, and explains how that mat is secured. If the supplier confirms the car but cannot show which option to select, ask for the variant name or a direct link to it.
3. Get fitment confirmed, then choose the pack
Still choosing? Send the build month and year, earlier or refreshed version, original market if known, and a bare driver-footwell photo. Include the colour and Yes/No variant you are considering. Ask us to identify the exact option, show the right-side driver mat and confirm how it is secured. You can email photos to support@evparts4x4.com.
Copy this fitment enquiry
Hi EVparts4x4, my Model 3 is right-hand drive. My build month and year are [month/year], the car is [earlier Model 3 or Highland], and its original market is [country if known]. I’m looking at [colour and Yes/No option].
I’ve attached photos of the bare driver’s footwell. Which exact variant fits, how is the driver’s mat secured, and what comes in the pack? Could you send top and underside photos of the actual driver’s mat?
The Model 3 floor mat listing uses colour and a Yes/No accessory option. After confirmation, match the option named in the reply before ordering. Yes and No describe package contents; they do not identify right- or left-hand drive.
- No: the product FAQ lists three cabin mats: driver, front passenger and rear.
- Yes: the same cabin-mat positions plus four optional items called “blankets” on the listing. Ask for a photo and coverage locations if you are buying them for a particular area.
- Boot or frunk: neither is explicitly identified as included in the cabin pack. Verify those separately, along with price, checkout currency and delivery to your postcode.
4. Check the mat in the car before driving
When the set arrives, check the variant label or order reference against the confirmation you received. Identify the driver’s mat before fitting the other pieces. If the edge profile or underside differs from the confirmed photos, pause before fitting and ask the supplier to check what was sent.
Follow the guidance for your vehicle and the confirmed mat. Tesla’s Australian manuals say to secure the driver mat on the vehicle carpet without stacking another mat. A mat can look close to the correct shape and still interfere when a pedal moves through its full range.
- While parked and before driving, remove the previous removable mat. Check that the carpet is clear and lay the new liner flat in its correct position.
- Engage the intended retention points or other specified securement. Check that the mat cannot creep forwards or lift into the pedal area.
- Check brake and accelerator clearance throughout pedal travel before driving. Recheck after removing and cleaning the mat.
Stop if it moves, lifts or contacts a pedal: Remove the mat before driving. Do not trim around the pedals or substitute an improvised fastener to make the wrong variant fit. Contact the supplier with photos of the mismatch.
Model 3 RHD floor mat FAQs
Does this listing confirm an Australian right-hand-drive Model 3 fit?
The publicly displayed Model 3 variants do not identify a separate RHD fit. Ask for written confirmation of the exact variant, its right-side driver mat and the retention method before buying.
Do earlier Model 3 floor mats fit the 2024+ Highland?
Do not assume they fit. Give the build details and ask for the exact variant or part number. A broad Model 3 year range does not confirm a match across refresh versions.
What do Yes and No mean on the Model 3 floor mat listing?
The retailer’s product FAQ says No includes three cabin mats and Yes adds four items described as optional blankets. These labels do not indicate the drive side, model refresh or cargo-area coverage.
What if my new driver mat shifts or touches a pedal?
Remove it before driving and contact the supplier about the mismatch. Check that the correct replacement can be secured on the vehicle carpet and remains clear of both pedals before using it.
Do all RHD driver mats use clips?
Use the securement system specified for the actual variant and your vehicle. Ask for an underside image and confirmation of which retention points or backing secure the mat; do not assume clips are supplied.
Still comparing coverage and materials? Read our Tesla Model 3 floor mat buying guide for carpet, rubber and TPE, cabin and boot coverage, and cleaning.
What the sources establish: The Australian Tesla manuals cover retention and pedal clearance. The retailer’s product listing describes the displayed variants and contents; it is not independent confirmation of RHD fitment.