Quick answer: These FJ Cruiser side steps are listed for both RHD and LHD vehicles. For Australia and New Zealand, the listed range is 2011–2016; imports need their original-market year checked. The kit supplies both boards, six brackets and hardware. It bolts to compatible factory mounts without drilling, but is not a rock-slider or jacking-point upgrade.
Looking for an easier step into your FJ, or replacing a tired set of running boards? Start with the mounting layout. The useful buying checks are your vehicle’s original market, the condition of its factory mounts and any steps or rock rails already fitted.
Will these FJ Cruiser side steps fit my RHD or LHD vehicle?
The EVparts4x4 FJ Cruiser side-step kit is listed for both right-hand-drive and left-hand-drive vehicles. Steering-wheel position is one check; it does not replace matching the market, year and mounting points.
For an Australian-delivered FJ Cruiser, start with the AU/NZ row below. For a Japanese or other import, use the original sales market and model year. A later local registration date does not change the vehicle’s original specification.
Swipe sideways to read the full table on a small screen.
| Original sales market | Listed model years | Your next check |
|---|---|---|
| Australia / New Zealand | 2011–2016 | Match the vehicle details and inspect the factory mounts. |
| USA / Canada | 2007–2014 | Use the original model year for an imported vehicle. |
| Japan (JDM) | 2010–2018 | Check the original Japanese vehicle details, not just local registration. |
| Middle East / GCC | 2007–2023 | Confirm the original market, year and mounting layout. |
The product’s broad 2007–2023 title combines market ranges. It does not mean an Australian FJ was sold throughout that period.
Have an import, modified mounts or an uncertain year?
Send your original market, model/build details, VIN and clear photographs of both mounting areas through EVparts4x4 fitment support. Include any existing rock rails or steps in the photographs so interference can be checked before you order.
What comes in the running-board kit?
You receive a fixed left and right pair, six steel mounting brackets—three per side—and a mounting hardware pack. “Side steps” and “running boards” refer to the same product here; it is not an electric retractable system.
Everyday access
The broad, textured PP stepping surface gives you a place to put your foot when entering or exiting the vehicle. Keep it clean and take care with wet or muddy footwear.
Factory-style appearance
A black polypropylene cover sits over an aluminium-alloy base. The OEM-style design is an aftermarket option for adding steps or replacing an existing compatible set.
On a compatible FJ with intact mounts, the supplied brackets use the existing side-step attachment points without drilling or cutting. Confirm that the full kit matches your vehicle before planning the installation.
Side steps or rock sliders: choose by the job
Choose this pair when you want a stepping surface and an OEM-style look. If your priority is supporting the vehicle against rocks, jacking or recovery, you need equipment rated for that purpose.
Swipe sideways to read the full table on a small screen.
| What you need | Is this kit the right category? |
|---|---|
| A fixed step for getting in and out | Yes, after confirming vehicle and mounting compatibility. |
| A replacement for worn running boards | A candidate; compare the mounting layout and check for damage first. |
| Rock contact, vehicle lifting or recovery | No. This kit is not rated for those uses. |
| A step that extends and retracts electrically | No. This is a fixed-board pair. |
Do not use these as jacking or recovery points. No tested maximum load rating is published for this kit. If you need a specified capacity, confirm it before purchasing rather than estimating from the materials or bracket count.
Check the factory mounts before fitting
A bolt-on installation depends on more than the model badge. Inspect both sides before ordering, particularly if old steps have been removed or the FJ has previously been modified.
- Mounting faces and threads: look for corrosion, deformation, damaged threads or previous alterations.
- Existing accessories: check whether rock rails, sliders or old brackets occupy or obstruct the attachment points.
- Supplied bracket layout: compare the kit’s fixing positions with the vehicle; use the supplied instructions to identify each bracket.
- Board clearance: check the intended step position and clearance to doors, trim and nearby components during dry fitting.
If a bracket will not seat squarely or its holes do not line up, stop and check the part identification and vehicle details. Do not enlarge holes, add improvised spacers or bend brackets to make an uncertain fit look correct.
Existing rock rails may need to be removed if they share the mounting locations or cause interference. Do not assume the two accessories can be fitted together simply because both are described as FJ Cruiser parts.
How to install FJ Cruiser side steps
Arrange the kit instructions and torque values before starting. The sequence below follows the product’s installation guidance; a professional fitter is recommended, especially where access, corrosion or previous modifications complicate the job.
- Prepare the vehicle safely. Park on level ground, apply the parking brake and allow components to cool. If lifting is required, use suitable rated equipment and stands.
- Lay out the complete kit. Identify the left and right boards, three brackets for each side and the hardware positions from the instructions.
- Inspect the mounting points. Clean the mounting areas and resolve damaged threads or interference before fitting. Remove existing steps or rails where necessary.
- Dry-fit the brackets and boards. Start the correct bolts by hand and leave them loose enough for alignment. Check that each board seats correctly on its three brackets.
- Check clearances, then tighten. Confirm board position, door clearance and nearby-component clearance. Tighten to the specified values for this kit and fasteners.
- Inspect before use and recheck. Confirm both boards are secure before stepping on them. Recheck fixings after initial use and during routine maintenance; keep the tread clean.
No universal torque figure
Use the values supplied for this kit. Do not copy torque settings from a different running-board or rock-slider installation, and do not force a fastener that will not start cleanly by hand.
Price, delivery and your final fitment check
Compare the cost of the complete pair, any removal or mounting repairs, and professional fitting—not just the board price. On the product page, select your destination market and check the displayed currency and checkout total.
This is a bulky two-board kit. Review the shipping policy and confirm the delivery arrangement for your address. Read the returns policy before ordering; a price in US dollars is not a delivered Australian or New Zealand total.
Road-use requirements depend on your location
Do not treat “bolt-on” as automatic approval. In NSW, check the modified-vehicle guidance and ask a licensed certifier if the certification requirements are unclear. Other Australian states and territories have their own requirements.
In New Zealand, the NZTA external-projections guidance addresses secure attachment and injury risks from external fittings. Have any uncertain installation checked by your inspector or fitter, and tell your insurer about the accessory.
Ready to choose?
- Original market and year match the listed range.
- Factory mounts are intact and the bracket layout matches.
- Existing steps or rails will not interfere.
- You want an entry step, not rated rock protection.
- You have confirmed the kit, instructions and delivered cost.
View the FJ Cruiser running-board pair
Still unsure about a mount or import specification? Send your vehicle details for a fitment check before buying. You can also browse the side-step and rail range for other designs; each requires its own vehicle match.
Frequently Asked Questions
Do these FJ Cruiser side steps fit RHD and LHD vehicles?
The product lists both right-hand-drive and left-hand-drive FJ Cruisers. Confirm the original market, model year and factory side-step mounts before ordering. Both vehicle sides are included; a left/right pair describes the boards, not the steering-wheel position.
Which FJ Cruiser years are listed for Australia and New Zealand?
The product lists Australia/New Zealand 2011–2016. The broader 2007–2023 title combines different markets; it is not an Australian model-year range. An imported vehicle should be checked against its original sales market and actual mounts.
What if my FJ Cruiser is an import with a later registration date?
Use its original sales market and model year rather than the local registration date alone. Send the build details, VIN and photographs of the mounting points if the vehicle does not clearly match the listed market range.
Does installation require drilling or cutting?
No drilling or cutting is specified for compatible vehicles with intact factory side-step mounting points. Dry-fit the supplied brackets first. If the holes do not align, stop and resolve the mismatch rather than drilling new holes or forcing the brackets.
Are both running boards, brackets and bolts included?
Yes. The listed kit includes one left-side board, one right-side board, six steel mounting brackets—three per side—and one mounting hardware pack. Use the supplied kit layout and instructions to identify the correct bracket positions.
Can these be fitted alongside existing rock rails or sliders?
Existing accessories may occupy the mounting points or interfere with the supplied brackets. Compare their attachment and clearance before ordering. Removal may be needed; do not assume the steps and existing rails can be stacked or fitted together.
Can I use these side steps as rock sliders or jacking points?
No. This kit is intended for getting in and out of the vehicle and is not rated as rock sliders, jacking points or recovery points. Choose separately rated equipment for those jobs.
What is the maximum weight rating?
A tested maximum load rating is not published for this kit. If you need a specific capacity, ask for a confirmed rating before buying. Do not estimate capacity from the aluminium base or number of brackets.
Are these genuine Toyota running boards?
No. They are OEM-style aftermarket running boards sold by EVparts4x4. OEM-style describes the appearance and fitting layout; it does not mean the kit is a genuine Toyota accessory.
Are the steps electric or retractable?
No. The listing is for a fixed left/right running-board pair. It is not a powered retractable-step kit and does not include motors or a control system.
What torque should I use on the mounting bolts?
Use the torque values supplied for this kit and its fasteners. Obtain the instructions before installation; no universal torque figure is given here. Do not substitute values from another running-board or rock-slider kit.
How do I check the total price and shipping?
Open the product page in your destination market and check the displayed currency, checkout total and shipping policy. Ask for the delivery arrangement for this bulky pair. An item price in another currency is not the delivered local cost.
