- Intelligent Real-Time Map Optimization: Advanced microprocessor analyzes engine sensor data continuously, dynamically adjusting boost pressure, ignition timing, and fuel injection maps for smoother power delivery across the entire RPM range.
- Dual-Channel Safety Redundancy: Sophisticated fail-safe bypass system automatically reverts to factory ECU settings if engine parameters exceed safety limits, protecting against overheating and over-boost conditions.
- Warranty-Friendly Non-Traceable Mod: True plug-and-play interface with OEM-grade connectors that leaves no digital footprint or flash count, allowing easy removal before servicing to preserve factory warranty.
- Optimized Torque for Off-Roading: Specifically calibrated for Tank 300's 2.0T engine with 15-20% low-end torque increase, critical for rock crawling, sand driving, and towing performance.
- Adaptive Eco-Performance Mode: Optimizes combustion efficiency to deliver 5-10% fuel economy improvement during highway cruising while enhancing overall power output.
GWM Tank 300 Plug-in Power Enhance Module
Regulärer Preis
$1,164.22
Verkaufspreis
$1,164.22
Regulärer Preis
Einzelpreis
Sparen Sie
Quick Answer
60-second summary
Intelligent plug-and-play power enhancement module for GWM Tank 300 (2020-2023) delivering 15-20% torque boost and 5-10% fuel economy improvement. Dual-channel fail-safe protection automatically reverts to factory settings if engine parameters exceed safety limits, preserving warranty integrity.
Install time
45-60 minutes
Drilling
No - plug-and-play
Warranty
Yes - reversible
Guaranteed Fit — Zero Purchase Risk
Verified for your vehicle. If these parts don't fit, we cover return shipping and issue a full refund. No questions asked.
Confirm this fits your vehicle
Volume Discount — More Sets, More Savings
1 Set
Standard price
$1,164.22
2 Sets
Save 10% — $1,047.80 each
$2,095.60
$2,328.44
3 Sets
Save 15% — $989.59 each ★ Best value
$2,968.76
$3,492.66
-
Estimated Delivery:Jun 30 - Jul 04
-
Kostenloser Expressversand bei Bestellungen über 100 $!
GWM Tank 300 Plug-in Power Enhance Module
Precision Fit Guaranteed
Every part verified against OEM vehicle data. Guaranteed to fit your vehicle — or we cover return shipping and issue a full refund.
Engineered for EV Platforms
Parts designed for BYD, Tesla, MG, GWM, and KIA — OEM-spec quality, tested for EV electrical systems and caliper compatibility.
Your Parts, Your Terms
Split payments with Zip, Afterpay, or Shop Pay. Zero-interest options — approved in seconds at checkout, no forms required.
Features & Benefits
What's Included
Confirmed compatible vehicles for this part. Use the vehicle selector above to verify fitment for your specific car.
| Year Range | Brand | Model |
|---|---|---|
| 2020-2023 | GWM | Tank 300 |
⚠ Compatibility note
For specific model/year/variant compatibility, please send your VIN or vehicle details to support@evparts4x4.com — we'll confirm fitment within 24 hours.
Not sure about compatibility? Contact us — we'll confirm within 24 hours.
Total time
45-60 minutes
Drilling required
No - plug-and-play
Warranty
Yes - reversible
This module is compatible with GWM Tank 300 models from 2020-2023. If your vehicle falls within this range, it will work with the 2.0T engine. We recommend confirming your exact model year and engine specification before purchase.
The package includes one Power Pack Performance Module, one Wiring Harness Kit, and one Adhesive Sealant. These components work together to provide a complete plug-and-play installation without requiring additional parts.
Installation typically takes 30-45 minutes and requires only basic hand tools to disconnect and reconnect sensor harnesses. The module uses OEM-grade connectors that click into place without special equipment. After installation, you'll need to complete a 20-30 km calibration drive so the module can optimize itself to your engine's specific characteristics.
This module is designed as a warranty-friendly modification with a non-traceable plug-and-play interface that leaves no digital footprint. It connects via OEM-grade connectors and can be easily removed before servicing. However, we recommend disclosing the modification to your dealer, as warranty coverage may vary depending on your service agreement.
The module delivers a 15-20% low-end torque boost specifically calibrated for the Tank 300's 2.0T engine. You'll notice improved performance during rock crawling, sand driving, and towing. The Intelligent Real-Time Map Optimization continuously adjusts boost pressure and fuel injection across the RPM range for smoother power delivery.
The module features Dual-Channel Safety Redundancy with a sophisticated fail-safe bypass system. If engine parameters exceed safety limits — such as overheating or over-boost conditions — the module automatically reverts to factory ECU settings to protect your engine. This ensures you can continue driving safely.
Yes — the Adaptive Eco-Performance Mode optimizes combustion efficiency to deliver a 5-10% fuel economy improvement during highway cruising while maintaining the enhanced power output. The actual improvement depends on your driving habits and fuel quality, which the module calibrates to during your first 20-30 km of driving.
Use the vehicle selector at the top of this page to confirm fitment for your specific year, brand, and model. If your vehicle is not listed or you're unsure, contact us at support@evparts4x4.com with your VIN — we'll confirm compatibility within 24 hours. Our Guaranteed Fit policy means if a compatibility issue is on our end, we'll make it right.
Orders are processed and dispatched within 2-4 business days. Standard parts ship via Air Parcel and typically arrive in 10-15 business days; larger body parts ship via Sea Freight and take around 30-45 business days. Shipping is free on orders over $100. You'll receive a tracking number once your order ships, and can track it anytime here. Full details in our Shipping Policy.
Yes — we offer a 30-day return window from the delivery date, and we don't charge any restocking fees. If an item arrives damaged or isn't quite right on our end, we'll arrange a replacement or full refund and cover the return shipping. For the complete terms, please see our Return & Refund Policy or start a return via our RMA page.
We don't provide installation directly, but most of our parts are designed for straightforward DIY installation — the step-by-step guide is in the Installation Guide tab above. For complex parts (e.g. brakes, suspension, electrical systems), we recommend having a qualified mechanic perform the installation. If you have technical questions during installation, our support team is happy to help at support@evparts4x4.com.
