- Custom-Fit Design: Moulded to match the BYD Shark 6's exact tailgate and body lines for a clean, factory-look finish with no trimming required.
- Rugged Sporty Presence: Adds aggressive styling that makes your ute stand out at the worksite, boat ramp, or on the road.
- Built for Australian Conditions: UV-stable, weather-resistant material won't crack, fade or yellow under harsh sun, dust, and extreme temperatures.
- Paint & Panel Protection: Shields the high-wear tailgate and rear edges from stone chips, scratches, scuffs and loading knocks during daily use.
- Peel-and-Stick Installation: Pre-applied automotive-grade 3M-style adhesive enables clean DIY fitting in minutes with zero drilling required.
- Durable & Low-Maintenance: Scratch- and corrosion-resistant finish wipes clean and withstands daily tradie and touring demands.
- Resale-Friendly: Non-invasive fit protects factory panels and keeps your Shark 6 looking sharp for future resale value.
BYD Shark 6 Tailgate Trim & Spoiler Kit | Mud Flaps (RHD)
Regulärer Preis
$148.00
Verkaufspreis
$148.00
Regulärer Preis
$159.00
Einzelpreis
Sparen Sie 7%
Quick Answer
60-second summary
Peel-and-stick tailgate trim, spoiler, and mud flap kit for BYD Shark 6 with factory-matched styling and UV-resistant material. Zero-drill adhesive installation protects against stone chips and scratches while maintaining resale value.
Install time
15-30 minutes + 24-48h cure
Drilling
No - adhesive
Warranty
Yes - non-invasive
Guaranteed Fit — Zero Purchase Risk
Verified for your vehicle. If these parts don't fit, we cover return shipping and issue a full refund. No questions asked.
Confirm this fits your vehicle
Volume Discount — More Sets, More Savings
1 Set
Standard price
$148.00
2 Sets
Save 10% — $133.20 each
$266.40
$296.00
3 Sets
Save 15% — $125.80 each ★ Best value
$377.40
$444.00
-
Estimated delivery:Aug 02 - Aug 06
-
Produkte mit einem Gewicht von über 10 kg werden per Seefracht versandt, sorgfältig verpackt und von lokalen Spediteuren ausgeliefert. Die genaue Lieferzeit wird nach der Bestellbestätigung bestätigt.
BYD Shark 6 Tailgate Trim & Spoiler Kit | Mud Flaps (RHD)
Precision Fit Guaranteed
Every part verified against OEM vehicle data. Guaranteed to fit your vehicle — or we cover return shipping and issue a full refund.
Engineered for EV Platforms
Parts designed for BYD, Tesla, MG, GWM, and KIA — OEM-spec quality, tested for EV electrical systems and caliper compatibility.
Your Parts, Your Terms
Split payments with Zip, Afterpay, or Shop Pay. Zero-interest options — approved in seconds at checkout, no forms required.
Features & Benefits
What's Included
Confirmed compatible vehicles for this part. Use the vehicle selector above to verify fitment for your specific car.
| Year Range | Brand | Model |
|---|---|---|
| 2025- | BYD | Shark 6 |
⚠ Compatibility note
For specific model/year/variant compatibility, please send your VIN or vehicle details to support@evparts4x4.com — we'll confirm fitment within 24 hours.
Not sure about compatibility? Contact us — we'll confirm within 24 hours.
Total time
15-30 minutes + 24-48h cure
Drilling required
No - adhesive
Warranty
Yes - non-invasive
Yes, this kit is designed for 2025+ BYD Shark 6 models. The custom-fit design is moulded to match the Shark 6's exact tailgate and body lines, so you'll get a clean, factory-look finish with no trimming required. If you have an earlier model year, contact us with your VIN for confirmation.
SKU3 (Rear Spoiler + Trim for Ladder Tailgate) is designed for Shark 6 models with a ladder-style tailgate, while SKU4 (Rear Spoiler + Trim for Standard Tailgate) fits the non-ladder tailgate variant. Both include a tailgate trim and alcohol prep pad. Choose based on your tailgate style to ensure proper fitment and alignment.
No, this is a zero-drill installation. The kit uses peel-and-stick technology with pre-applied automotive-grade 3M-style adhesive, so you can fit it cleanly in minutes without any drilling or permanent modifications. This also keeps your Shark 6 resale-friendly by protecting factory panels.
You should avoid washing the car or touching the fitted area for 24–48 hours to allow complete adhesive cure. During installation, apply firm, even pressure for 30–60 seconds after pressing the piece into place. For best results, fit the kit on warm, dry days in a sheltered garage and avoid fitting in rain or freezing conditions.
The kit is made from UV-stable, weather-resistant material designed to withstand harsh sun, dust, and extreme temperatures without cracking, fading, or yellowing. It's built specifically for Australian conditions and features a scratch- and corrosion-resistant finish that wipes clean and handles daily tradie and touring demands.
SKU1 includes a 3-piece mud flap set, a fitting kit, and an alcohol prep pad for surface cleaning before installation. The mud flaps help shield your Shark 6's high-wear areas from stone chips, scratches, scuffs, and loading knocks during daily use.
Yes, surface preparation is critical. Wipe the tailgate and mounting area thoroughly with the included alcohol prep pad or isopropyl alcohol to remove all dust, wax, and grease. This ensures proper adhesive bonding and lasting adhesion. In cooler weather below 15°C, you can gently warm the panel with a hairdryer to help the adhesive grip firmly.
Use the vehicle selector at the top of this page to confirm fitment for your specific year, brand, and model. If your vehicle is not listed or you're unsure, contact us at support@evparts4x4.com with your VIN — we'll confirm compatibility within 24 hours. Our Guaranteed Fit policy means if a compatibility issue is on our end, we'll make it right.
Orders are processed and dispatched within 2-4 business days. Standard parts ship via Air Parcel and typically arrive in 10-15 business days; larger body parts ship via Sea Freight and take around 30-45 business days. Shipping is free on orders over $100. You'll receive a tracking number once your order ships, and can track it anytime here. Full details in our Shipping Policy.
Yes — we offer a 30-day return window from the delivery date, and we don't charge any restocking fees. If an item arrives damaged or isn't quite right on our end, we'll arrange a replacement or full refund and cover the return shipping. For the complete terms, please see our Return & Refund Policy or start a return via our RMA page.
We don't provide installation directly, but most of our parts are designed for straightforward DIY installation — the step-by-step guide is in the Installation Guide tab above. For complex parts (e.g. brakes, suspension, electrical systems), we recommend having a qualified mechanic perform the installation. If you have technical questions during installation, our support team is happy to help at support@evparts4x4.com.
