Tank 300 rear seat quick-release bracket kit with installation view and components.
Upgraded damage-free quick-release rear seat bracket kit for Tank 300, featuring installation and component views.
Tank 300 quick-release rear seat bracket kit bundled with two foldable wooden-lid storage boxes.
Tank 300 quick-release bracket kit with custom leather bed mats, showing installed view and full component set.
Tank 300 microfiber leather travel bed extension mats with screw-fixing hardware and 2-piece component set.
Tank 400 4-piece quick-release hook pin kit for seat understructure, including metal brackets, pins, and hardware.
Tank 400 Style B quick-release hook pin 4-piece set, displaying metal brackets, pins, and circular clips on a white background.
A 2-pack of white foldable storage boxes with wooden lids shown inside a vehicle, including a dimensioned product diagram.
Tank 300 non-inflatable 5cm memory foam camping bed mat shown laid out in a vehicle trunk and rolled in its storage bag.
Tank 300 interior showing a fully flat cargo area and rear seat bed extension setup.
Close-up of the quick-release bracket hardware and mounting pins installed on a vehicle's rear seat structure.
Interior view of two black quick-release brackets with protective foam covers securely mounted to a vehicle's rear seat floor.
Wide-angle interior view showing quick-release brackets installed with rear seats folded forward for maximum storage.
View of foldable steel support legs integrated into the back of a vehicle's rear seats for bed extension stability.
Interior view showing a two-piece travel bed extension installed over the rear passenger footwell.
Close-up view of a single black quick-release seat bracket with a foam-covered handle installed on the vehicle floor.
Tank 300 rear seat quick-release bracket kit with installation view and components.
Upgraded damage-free quick-release rear seat bracket kit for Tank 300, featuring installation and component views.
Tank 300 quick-release rear seat bracket kit bundled with two foldable wooden-lid storage boxes.
Tank 300 quick-release bracket kit with custom leather bed mats, showing installed view and full component set.
Tank 300 microfiber leather travel bed extension mats with screw-fixing hardware and 2-piece component set.
Tank 400 4-piece quick-release hook pin kit for seat understructure, including metal brackets, pins, and hardware.
Tank 400 Style B quick-release hook pin 4-piece set, displaying metal brackets, pins, and circular clips on a white background.
A 2-pack of white foldable storage boxes with wooden lids shown inside a vehicle, including a dimensioned product diagram.
Tank 300 non-inflatable 5cm memory foam camping bed mat shown laid out in a vehicle trunk and rolled in its storage bag.
Tank 300 interior showing a fully flat cargo area and rear seat bed extension setup.
Close-up of the quick-release bracket hardware and mounting pins installed on a vehicle's rear seat structure.
Interior view of two black quick-release brackets with protective foam covers securely mounted to a vehicle's rear seat floor.
Wide-angle interior view showing quick-release brackets installed with rear seats folded forward for maximum storage.
View of foldable steel support legs integrated into the back of a vehicle's rear seats for bed extension stability.
Interior view showing a two-piece travel bed extension installed over the rear passenger footwell.
Close-up view of a single black quick-release seat bracket with a foam-covered handle installed on the vehicle floor.

GWM Tank 300 & 400 Rear Seat Camping Conversion Kits & Accessories

Regular price $272.88
Sale price $272.88 Regular price
Unit price
Save
Quick Answer 60-second summary

Choose Tank 300 seat brackets or bundles, Tank 400 hook-and-pin kits, or accessories only. Contents and fitting differ; Installation video mainly covers Tank 300.

Install time 45-60 minutes
Drilling No - bolt-on
Warranty Yes - non-invasive
Guaranteed Fit — Zero Purchase Risk
Verified for your vehicle. If these parts don't fit, we cover return shipping and issue a full refund. No questions asked.
Confirm this fits your vehicle

Send us your details and we'll confirm compatibility within 24 hours.

We usually respond within 24 hours on business days.

Volume Discount — More Sets, More Savings
1 Set
Standard price
$272.88
2 Sets
Save 10% — $245.59 each
$491.18
$545.76
3 Sets
Save 15% — $231.95 each ★ Best value
$695.84
$818.64
Secure & Accepted Payment Methods
VISA
AMEX
Pay Pal
Shop Pay
Pay
G o o g le Pay
Compare Ask a question

Ask a Question

* Required fields

Size guide Share
  • Estimated Delivery:Dec 05 - Dec 09

  • Free Air Express Shipping on orders over $100!

Check your vehicle fitment

Compatibility details are awaiting verification. Contact us with your vehicle model, model year and market version before ordering.

Tank 300 rear seat quick-release bracket kit with installation view and components.

GWM Tank 300 & 400 Rear Seat Camping Conversion Kits & Accessories

Precision Fit Guaranteed

Every part verified against OEM vehicle data. Guaranteed to fit your vehicle — or we cover return shipping and issue a full refund.

Engineered for EV Platforms

Parts designed for BYD, Tesla, MG, GWM, and KIA — OEM-spec quality, tested for EV electrical systems and caliper compatibility.

Your Parts, Your Terms

Split payments with Zip, Afterpay, or Shop Pay. Zero-interest options — approved in seconds at checkout, no forms required.

Features & Benefits

  • Choose the Setup You Need: Select a vehicle-specific bracket kit, a Tank 300 bundle, Tank 400 hook-and-pin hardware, or an accessory-only option. Each selection has its own contents.
  • Tank 300 Quick-Release Conversion: The Standard and Gen 2 bracket kits use the Tank 300 seat mounting layout and padded support bars to help prepare the rear seating area for camping. Gen 2 describes the upgraded bracket design, not the vehicle model year.
  • Two Ways to Add Tank 300 Accessories: Choose the bracket-and-box bundle for rear-footwell storage, or the bracket-and-panel bundle for two microfiber-leather-covered bed extension panels. A mattress is supplied only with the mattress-only option.
  • Separate Hardware for Tank 400: Tank 400 uses its own four-piece hook-and-pin kit rather than the Tank 300 bracket arrangement. Choose A for the short-tab design or B for the long-tab design shown in the photos, with fitment confirmed for your vehicle.
  • Clear Installation Choices: Tank 300 bracket kits bolt to the matching factory mounting points. Bed panels use separate screw fixings; the panels-only Drill-Fit option requires drilling. The Tank 300 video is not a Tank 400 installation guide.
  • Plan Your Sleeping Space: Usable length depends on front-seat position, rear-seat layout and a properly supported footwell extension. A roughly 1.9 m setup is a reference configuration, not the size of every option or a guarantee from brackets alone.

What's Included

  • Tank 300 – Standard Quick-Release Bracket Kit: One bracket kit with matching release bases, pins, padded support bars and mounting hardware. No storage boxes, bed panels or mattress.
  • Tank 300 – Gen 2 Upgraded Quick-Release Bracket Kit: One upgraded bracket kit with the matching bases, pins, support parts and mounting hardware shown in the selected option photo. No storage boxes, bed panels or mattress.
  • Tank 300 – Bracket Kit + 2 Footwell Storage Boxes: The bracket kit shown in the selected option photo, plus two folding storage boxes with lids. No bed panels or mattress.
  • Tank 300 – Bracket Kit + 2 Bed Panels (Screw-Fixed): The bracket kit shown in the selected option photo, plus two microfiber-leather-covered bed extension panels and their panel fixings. No storage boxes or mattress.
  • Tank 300 – 2 Bed Extension Panels Only (Drill-Fit): Two microfiber-leather-covered bed extension panels with the support legs and panel fixings shown in the selected option photo. No quick-release bracket kit, storage boxes or mattress. Drilling is required for this option.
  • Tank 400 – Hook & Pin Kit A (Short Mounting Tabs, 4-Pack): Four short-tab hook brackets, four pins and matching retaining hardware. No Tank 300 leveling bars, storage boxes, bed panels or mattress.
  • Tank 400 – Hook & Pin Kit B (Long Mounting Tabs, 4-Pack): Four long-tab hook brackets, four pins and matching retaining hardware. No Tank 300 leveling bars, storage boxes, bed panels or mattress.
  • Accessory Only – 2 Folding Storage Boxes (White): Two white folding storage boxes with lids. No brackets, bed panels or mattress.
  • Tank 300 – Foldable Non-Inflatable Mattress Only: One foldable non-inflatable mattress and the storage bag shown in the selected option photo. No brackets, storage boxes or bed panels.

Product Gallery

Confirmed compatible vehicles for this part. Use the vehicle selector above to verify fitment for your specific car.

Year Range Brand Model
2021-2026 GWM Tank 300
2022-2026 GWM Tank 400
⚠ Compatibility note
For specific model/year/variant compatibility, please send your VIN or vehicle details to support@evparts4x4.com — we'll confirm fitment within 24 hours.

Not sure about compatibility? Contact us — we'll confirm within 24 hours.

Total time
45-60 minutes
Drilling required
No - bolt-on
Warranty
Yes - non-invasive
  1. Check Your Selected Kit
    Confirm that your kit is for Tank 300 and compare the supplied parts with the selected option photo. Check the required seat mounting layout before loosening any fasteners.
  2. Install the Quick-Release Brackets
    Follow the instructions for your Standard or Gen 2 kit to fit the brackets at the matching original seat mounting points. Use the specified fasteners and tightening instructions. Tank 400 hook-and-pin kits use a different installation method.
  3. Fit the Padded Supports
    Install the support parts supplied with your Tank 300 kit in the specified orientation. Keep the protective padding between the support bars and the upholstery.
  4. Prepare the Sleeping Layout
    With the vehicle parked, release and reposition or remove the rear seat cushions as shown for your kit. Fold the rear backrests and adjust the front seats to create the available sleeping space.
  5. Add Your Selected Accessories
    Position the storage boxes or install the bed extension panels if included in your selected option. Panel installation is separate from bracket installation. The Panels Only (Drill-Fit) option requires drilling; confirm the fixing locations before making holes. Ensure the full sleeping surface is supported before adding a mattress.
  6. Check the Setup and Restore the Seats Before Driving
    Check that the sleeping surface is supported and all installed parts are secure. Before carrying passengers, return the seats to their normal position and confirm that all seat fasteners and locking mechanisms are fully engaged. Use the sleeping layout only while the vehicle is parked.
Choose a Tank 300 bracket kit or bundle for Tank 300. Tank 400 requires its separate Hook & Pin Kit A or B. The storage-box and mattress-only options do not include a bracket kit, and the bed-panels-only option is not a complete bed conversion kit.
Standard is the original bracket design; Gen 2 is the upgraded bracket design shown in its option photo. Gen 2 refers to the product generation, not a 2025-only Tank 300 model. Both are Tank 300 options; confirm your seat mounting layout before ordering.
Kit A has short mounting tabs. Kit B has longer mounting tabs with an additional hole, as shown in the photos. Both are four-piece hook-and-pin kits with retaining hardware. Match the correct design to your seat mounting layout; send your vehicle details and a mounting-point photo if unsure.
No. Tank 300 uses its dedicated seat bracket and support-bar arrangement. Tank 400 uses different hook-and-pin hardware at the seat understructure connections. The parts and fitting procedures are not interchangeable.
The current guide and video mainly show the Tank 300 camping arrangement. They are not Tank 400 fitting instructions and do not replace the instructions for separate bed-panel fixings. Use the instructions matched to your selected kit.
The Tank 300 quick-release bracket kits use the matching factory mounting points without drilling. Bed panels have separate screw fixings; check the selected panel fitting method. The panels-only option marked Drill-Fit requires drilling. Do not assume every option is drill-free.
No. The microfiber-leather-covered panels extend the supported bed surface; they are not a full sleeping mattress. A mattress adds the sleeping layer and is sold separately on this page.
They provide gear storage in the rear footwell area beneath an extended camping setup. Their height and suitability for any support role must match your layout. They do not replace a complete, properly supported bed surface or a mattress.
A mattress is included only when you select the mattress-only option. The current mattress photo specifies Tank 300 only. Tank 400 mattress fitment has not been confirmed for this listing.
No. Approximately 1.9 m is a reference for a configured Tank 300 setup with suitable seat positioning and supported extension. Actual usable length depends on your vehicle and layout. Measure your space; brackets, pins or boxes alone are not a complete bed.
Allow approximately 45-60 minutes for initial Tank 300 bracket fitting, depending on the kit, tools and installer. This is not a time estimate for Tank 400 hardware or drill-fit panels. Accessory placement is a separate step.
Send your vehicle year, make, exact model, powertrain and VIN to support@evparts4x4.com. For Tank 400 Kit A or B, include a clear photo of the original rear seat mounting connections so we can match the hardware.
Use the vehicle selector at the top of this page to confirm fitment for your specific year, brand, and model. If your vehicle is not listed or you're unsure, contact us at support@evparts4x4.com with your VIN — we'll confirm compatibility within 24 hours. Our Guaranteed Fit policy means if a compatibility issue is on our end, we'll make it right.
Orders are processed and dispatched within 2-4 business days. Standard parts ship via Air Parcel and typically arrive in 10-15 business days; larger body parts ship via Sea Freight and take around 30-45 business days. Shipping is free on orders over $100. You'll receive a tracking number once your order ships, and can track it anytime here. Full details in our Shipping Policy.
Yes — we offer a 30-day return window from the delivery date, and we don't charge any restocking fees. If an item arrives damaged or isn't quite right on our end, we'll arrange a replacement or full refund and cover the return shipping. For the complete terms, please see our Return & Refund Policy or start a return via our RMA page.
We don't provide installation directly, but most of our parts are designed for straightforward DIY installation — the step-by-step guide is in the Installation Guide tab above. For complex parts (e.g. brakes, suspension, electrical systems), we recommend having a qualified mechanic perform the installation. If you have technical questions during installation, our support team is happy to help at support@evparts4x4.com.