- Choose the Setup You Need: Select a vehicle-specific bracket kit, a Tank 300 bundle, Tank 400 hook-and-pin hardware, or an accessory-only option. Each selection has its own contents.
- Tank 300 Quick-Release Conversion: The Standard and Gen 2 bracket kits use the Tank 300 seat mounting layout and padded support bars to help prepare the rear seating area for camping. Gen 2 describes the upgraded bracket design, not the vehicle model year.
- Two Ways to Add Tank 300 Accessories: Choose the bracket-and-box bundle for rear-footwell storage, or the bracket-and-panel bundle for two microfiber-leather-covered bed extension panels. A mattress is supplied only with the mattress-only option.
- Separate Hardware for Tank 400: Tank 400 uses its own four-piece hook-and-pin kit rather than the Tank 300 bracket arrangement. Choose A for the short-tab design or B for the long-tab design shown in the photos, with fitment confirmed for your vehicle.
- Clear Installation Choices: Tank 300 bracket kits bolt to the matching factory mounting points. Bed panels use separate screw fixings; the panels-only Drill-Fit option requires drilling. The Tank 300 video is not a Tank 400 installation guide.
- Plan Your Sleeping Space: Usable length depends on front-seat position, rear-seat layout and a properly supported footwell extension. A roughly 1.9 m setup is a reference configuration, not the size of every option or a guarantee from brackets alone.
GWM Tank 300 & 400 Rear Seat Camping Conversion Kits & Accessories
Regular price
$198.02
Sale price
$198.02
Regular price
Unit price
Save
Quick Answer
60-second summary
Choose Tank 300 seat brackets or bundles, Tank 400 hook-and-pin kits, or accessories only. Contents and fitting differ; Installation video mainly covers Tank 300.
Install time
45-60 minutes
Drilling
No - bolt-on
Warranty
Yes - non-invasive
Guaranteed Fit — Zero Purchase Risk
Verified for your vehicle. If these parts don't fit, we cover return shipping and issue a full refund. No questions asked.
Confirm this fits your vehicle
Volume Discount — More Sets, More Savings
1 Set
Standard price
$198.02
2 Sets
Save 10% — $178.22 each
$356.44
$396.04
3 Sets
Save 15% — $168.32 each ★ Best value
$504.95
$594.06
-
Estimated Delivery:Dec 05 - Dec 09
-
Free Air Express Shipping on orders over $100!
Check your vehicle fitment
Select your vehicle's drive side before adding this item.
Compatibility details are awaiting verification. Contact us with your vehicle model, model year and market version before ordering.
GWM Tank 300 & 400 Rear Seat Camping Conversion Kits & Accessories
Precision Fit Guaranteed
Every part verified against OEM vehicle data. Guaranteed to fit your vehicle — or we cover return shipping and issue a full refund.
Engineered for EV Platforms
Parts designed for BYD, Tesla, MG, GWM, and KIA — OEM-spec quality, tested for EV electrical systems and caliper compatibility.
Your Parts, Your Terms
Split payments with Zip, Afterpay, or Shop Pay. Zero-interest options — approved in seconds at checkout, no forms required.
Features & Benefits
What's Included
Product Gallery

Confirmed compatible vehicles for this part. Use the vehicle selector above to verify fitment for your specific car.
| Year Range | Brand | Model |
|---|---|---|
| 2021-2026 | GWM | Tank 300 |
| 2022-2026 | GWM | Tank 400 |
⚠ Compatibility note
For specific model/year/variant compatibility, please send your VIN or vehicle details to support@evparts4x4.com — we'll confirm fitment within 24 hours.
Not sure about compatibility? Contact us — we'll confirm within 24 hours.
Total time
45-60 minutes
Drilling required
No - bolt-on
Warranty
Yes - non-invasive
Choose a Tank 300 bracket kit or bundle for Tank 300. Tank 400 requires its separate Hook & Pin Kit A or B. The storage-box and mattress-only options do not include a bracket kit, and the bed-panels-only option is not a complete bed conversion kit.
Standard is the original bracket design; Gen 2 is the upgraded bracket design shown in its option photo. Gen 2 refers to the product generation, not a 2025-only Tank 300 model. Both are Tank 300 options; confirm your seat mounting layout before ordering.
Kit A has short mounting tabs. Kit B has longer mounting tabs with an additional hole, as shown in the photos. Both are four-piece hook-and-pin kits with retaining hardware. Match the correct design to your seat mounting layout; send your vehicle details and a mounting-point photo if unsure.
No. Tank 300 uses its dedicated seat bracket and support-bar arrangement. Tank 400 uses different hook-and-pin hardware at the seat understructure connections. The parts and fitting procedures are not interchangeable.
The current guide and video mainly show the Tank 300 camping arrangement. They are not Tank 400 fitting instructions and do not replace the instructions for separate bed-panel fixings. Use the instructions matched to your selected kit.
The Tank 300 quick-release bracket kits use the matching factory mounting points without drilling. Bed panels have separate screw fixings; check the selected panel fitting method. The panels-only option marked Drill-Fit requires drilling. Do not assume every option is drill-free.
No. The microfiber-leather-covered panels extend the supported bed surface; they are not a full sleeping mattress. A mattress adds the sleeping layer and is sold separately on this page.
They provide gear storage in the rear footwell area beneath an extended camping setup. Their height and suitability for any support role must match your layout. They do not replace a complete, properly supported bed surface or a mattress.
A mattress is included only when you select the mattress-only option. The current mattress photo specifies Tank 300 only. Tank 400 mattress fitment has not been confirmed for this listing.
No. Approximately 1.9 m is a reference for a configured Tank 300 setup with suitable seat positioning and supported extension. Actual usable length depends on your vehicle and layout. Measure your space; brackets, pins or boxes alone are not a complete bed.
Allow approximately 45-60 minutes for initial Tank 300 bracket fitting, depending on the kit, tools and installer. This is not a time estimate for Tank 400 hardware or drill-fit panels. Accessory placement is a separate step.
Send your vehicle year, make, exact model, powertrain and VIN to support@evparts4x4.com. For Tank 400 Kit A or B, include a clear photo of the original rear seat mounting connections so we can match the hardware.
Use the vehicle selector at the top of this page to confirm fitment for your specific year, brand, and model. If your vehicle is not listed or you're unsure, contact us at support@evparts4x4.com with your VIN — we'll confirm compatibility within 24 hours. Our Guaranteed Fit policy means if a compatibility issue is on our end, we'll make it right.
Orders are processed and dispatched within 2-4 business days. Standard parts ship via Air Parcel and typically arrive in 10-15 business days; larger body parts ship via Sea Freight and take around 30-45 business days. Shipping is free on orders over $100. You'll receive a tracking number once your order ships, and can track it anytime here. Full details in our Shipping Policy.
Yes — we offer a 30-day return window from the delivery date, and we don't charge any restocking fees. If an item arrives damaged or isn't quite right on our end, we'll arrange a replacement or full refund and cover the return shipping. For the complete terms, please see our Return & Refund Policy or start a return via our RMA page.
We don't provide installation directly, but most of our parts are designed for straightforward DIY installation — the step-by-step guide is in the Installation Guide tab above. For complex parts (e.g. brakes, suspension, electrical systems), we recommend having a qualified mechanic perform the installation. If you have technical questions during installation, our support team is happy to help at support@evparts4x4.com.