BYD Dash Cam EL-3776900 | Front 1080P Camera Module

This dash cam fits BYD vehicles equipped with the factory blue dash-cam connector and pre-installed camera cable beside the interior rear-view mirror. The vehicle table lists Atto 3, Han, Tang, Dolphin, Seal, Seal U, Sealion 6, Sealion 7, Seal 6 DM-i, Atto 1, Atto 2, Shark 6, Sealion 5 and Sealion 8. For each listed vehicle, the blue camera connector and cable must be present for direct installation. If either is missing, this camera-only product is not a direct plug-in installation; a compatible harness or additional work is needed. Check the actual camera connection, not just the model name.

Yes. According to the supplier, when the factory blue dash-cam connector and pre-installed camera cable are present, the camera connects directly to that cable and fits in the existing camera location. A memory card and first-time DVR recording setup are separate requirements; plug-in hardware installation does not mean recordings will save without a card.

A compatible recording card is required and is not included. Use the recording-card slot in the vehicle and the specification in its manual. This camera-only module is not advertised as a card-free recorder that saves footage to the infotainment system's internal storage.

For the 2022 NZ Atto 3 manual, the DVR card slot is in the lower layer of the centre/auxiliary console. The 2023 NZ Dolphin manual locates its card slot above the centre-console storage compartment. A 2024 Indian Seal owner installation reports the microSD slot below, next to the USB ports. These are model-specific references; check the actual vehicle and its manual. The card is not inserted into an assumed slot on this camera module.

Use the specification for the exact vehicle and recorder software. The 2023 NZ Dolphin manual specifies a TF/microSD card up to 128GB, Class 10 or higher and FAT32 for its card interface. That is not a universal specification for all BYD models. Check the applicable manual, back up files before formatting, and verify a saved test clip.

After connecting the camera, power on the vehicle and check Driving Recorder/DVR. Use the vehicle-approved infotainment restart procedure if needed for recognition. Insert a compatible recording card, prepare it as instructed, enable recording and replay a saved clip. If Driving Recorder does not appear, ask BYD service to check the camera connection and recorder software. These recording setup steps are separate from the supplier-confirmed blue-plug hardware installation.

The camera alone cannot replace missing wiring or a missing card interface. Confirm the required parts and installation route before buying. Public Dolphin and Atto 3 owner reports include additional cable work. This listing does not include a retrofit harness, card-slot module or software activation service.

This listing supplies a front camera module only. It is not a rear-camera or 360-degree conversion and includes no dedicated parking-surveillance power kit. Recording behaviour depends on the supported vehicle DVR system; continuous recording with the vehicle switched off is not promised.

Use the vehicle selector at the top of this page to confirm fitment for your specific year, brand, and model. If your vehicle is not listed or you're unsure, contact us at support@evparts4x4.com with your VIN — we'll confirm compatibility within 24 hours. Our Guaranteed Fit policy means if a compatibility issue is on our end, we'll make it right.

Orders are processed and dispatched within 2-4 business days. Standard parts ship via Air Parcel and typically arrive in 10-15 business days; larger body parts ship via Sea Freight and take around 30-45 business days. Shipping is free on orders over $100. You'll receive a tracking number once your order ships, and can track it anytime here. Full details in our Shipping Policy.

Yes — we offer a 30-day return window from the delivery date, and we don't charge any restocking fees. If an item arrives damaged or isn't quite right on our end, we'll arrange a replacement or full refund and cover the return shipping. For the complete terms, please see our Return & Refund Policy or start a return via our RMA page.

We don't provide installation directly, but most of our parts are designed for straightforward DIY installation — the step-by-step guide is in the Installation Guide tab above. For complex parts (e.g. brakes, suspension, electrical systems), we recommend having a qualified mechanic perform the installation. If you have technical questions during installation, our support team is happy to help at support@evparts4x4.com.