- 180° Swing-Out Access: Pull the quick-release lever and the box swings a full 180° over the tailgate for instant, arm's-reach access. Lifts straight off its hinges to double as a portable tool caddy at the campsite or job site.
- Universal Bed-Wall Mount: Bolts to the flat inner bed wall of most mid-size utes and full-size trucks with a low-profile design that clears the wheel arch. Works alongside roller shutters, hard lids and soft tonneaus, and won't block your factory tie-down points.
- 34kg Heavy-Duty Capacity: Built from high-impact, UV-stabilised ABS that shrugs off harsh sun without fading, cracking or rusting. Includes an adjustable interior tool tray and a top-lid organiser with built-in cup holders.
- Double-Lock Security: The key-lockable lid protects your tools from theft, while a heavy-duty padlock loop on the hinge bracket stops opportunists lifting the whole unit out of your bed.
- Weather & Dust Proof (IP66): A full-perimeter, automotive-grade rubber seal keeps recovery gear, tools and electronics bone-dry in heavy rain and dusty trail conditions.
Swing-Out Truck Bed Toolbox — Lockable Ute Tub Storage | Fits BYD Shark 6, Ranger, HiLux, GWM Cannon, F-150, RAM 1500 & Tundra
Regular price
$380.99
Sale price
$380.99
Regular price
Unit price
Save
Quick Answer
60-second summary
A heavy-duty 34kg swing-out toolbox with 180° access, double-lock security and an IP66 weatherproof seal. It bolts to the inner bed wall of most mid-size utes and full-size trucks — including the BYD Shark 6, Ford Ranger, Toyota HiLux, GWM Cannon, Ford F-150, RAM 1500 and Toyota Tundra. Lifts off its hinges to double as a portable caddy, and works with roller shutters and hard lids.
Install time
45-60 minutes
Drilling
Yes - self-tapping screws
Warranty
Caution - check dealer
Guaranteed Fit — Zero Purchase Risk
Verified for your vehicle. If these parts don't fit, we cover return shipping and issue a full refund. No questions asked.
Confirm this fits your vehicle
Volume Discount — More Sets, More Savings
1 Set
Standard price
$380.99
2 Sets
Save 10% — $342.89 each
$685.78
$761.98
3 Sets
Save 15% — $323.84 each ★ Best value
$971.52
$1,142.97
-
Estimated delivery:Sep 13 - Sep 17
-
Overweight products (over 10 kg) are shipped by sea freight, carefully packed and delivered by local carriers. The exact shipping time will be confirmed after order confirmation.
Swing-Out Truck Bed Toolbox — Lockable Ute Tub Storage | Fits BYD Shark 6, Ranger, HiLux, GWM Cannon, F-150, RAM 1500 & Tundra
Precision Fit Guaranteed
Every part verified against OEM vehicle data. Guaranteed to fit your vehicle — or we cover return shipping and issue a full refund.
Engineered for EV Platforms
Parts designed for BYD, Tesla, MG, GWM, and KIA — OEM-spec quality, tested for EV electrical systems and caliper compatibility.
Your Parts, Your Terms
Split payments with Zip, Afterpay, or Shop Pay. Zero-interest options — approved in seconds at checkout, no forms required.
Features & Benefits
What's Included
Product Gallery
Confirmed compatible vehicles for this part. Use the vehicle selector above to verify fitment for your specific car.
| Year Range | Brand | Model |
|---|---|---|
| 2025-2026 | BYD | Shark 6 |
| 2011-2026 | Ford | Ranger |
| 2015-2026 | Ford | F-150 (Raptor) |
| 2015-2026 | Toyota | HiLux (Revo) |
| 2007-2026 | Toyota | Tundra |
| 2021-2026 | GWM | Cannon |
| 2019-2026 | RAM | 1500 |
| 1995-2026 | Toyota | Tacoma |
⚠ Compatibility note
BYD Shark 6 fitment confirmed 2023-2026 only. Toyota Tacoma fitment spans 1995-2026 — verify your model year and bed configuration before purchase. For specific variant compatibility, send your VIN to support@evparts4x4.com — we'll confirm fitment within 24 hours.
Not sure about compatibility? Contact us — we'll confirm within 24 hours.
Total time
45-60 minutes
Drilling required
Yes - self-tapping screws
Warranty
Caution - check dealer
It's a universal bed-wall-mounted toolbox that suits most mid-size utes and full-size trucks, including the BYD Shark 6, Ford Ranger, Toyota HiLux, GWM Cannon, Ford F-150 (incl. Raptor), RAM 1500 and Toyota Tundra. Because it bolts to the inner bed wall rather than a vehicle-specific mould, fitment comes down to your usable bed-wall space — measure yours or send your VIN and we'll confirm within 24 hours.
It bolts to the flat inner bed wall with self-tapping screws and swings out on its hinges, so it isn't moulded to a single vehicle's shape. As long as your bed wall has enough flat space and clearance from the wheel arch, it fits — which is why the same box works across mid-size utes like the Ranger, HiLux, Cannon and Shark 6, and full-size trucks like the F-150, RAM 1500 and Tundra.
Most standard beds work, but bed dimensions change between generations and configurations. Measure the flat wall space inside your bed and the clearance to the wheel arch, or send your VIN to support@evparts4x4.com for a 24-hour fitment confirmation before you order.
The 1pc SKU includes a single swing-out toolbox unit, while the 2pcs SKU provides two complete units. On a dual-cab ute or a full-size truck you can fit one on each side of the bed for balanced load distribution and symmetrical access from both sides.
Around 45–60 minutes as a DIY job in your driveway. You'll need a power drill and the supplied self-tapping hex screws to mount the hinge bracket and striker latch bracket to your bed wall. The included guide covers positioning, alignment and testing the 180° swing action, so most owners complete it without professional help.
The self-tapping hex screws secure the hinge and striker brackets to the inner bed wall without compromising structural integrity, and this method is standard for aftermarket bed storage. Manufacturer terms vary, so we recommend confirming with your dealer whether any warranty considerations apply to your specific vehicle.
Yes. A full-perimeter automotive-grade rubber weather seal rated IP66 keeps recovery gear, tools and electronics bone-dry in heavy downpours and dusty trail conditions. The key-lockable lid and secure latch keep the seal tight when the box is closed.
The package includes the swing-out toolbox, hinge and striker bracket assemblies, an adjustable interior tool tray, a top-lid organiser with built-in cup holders, self-tapping screws, the rubber weather seal, installation hardware, and a key with padlock. The adjustable tray lets you configure the layout to suit your gear, and you can lift the entire box off the hinges to use as a portable caddy on the job site or at camp.
Use the vehicle selector at the top of this page to confirm fitment for your specific year, brand, and model. If your vehicle is not listed or you're unsure, contact us at support@evparts4x4.com with your VIN — we'll confirm compatibility within 24 hours. Our Guaranteed Fit policy means if a compatibility issue is on our end, we'll make it right.
Orders are processed and dispatched within 2-4 business days. Standard parts ship via Air Parcel and typically arrive in 10-15 business days; larger body parts ship via Sea Freight and take around 30-45 business days. Shipping is free on orders over $100. You'll receive a tracking number once your order ships, and can track it anytime here. Full details in our Shipping Policy.
Yes — we offer a 30-day return window from the delivery date, and we don't charge any restocking fees. If an item arrives damaged or isn't quite right on our end, we'll arrange a replacement or full refund and cover the return shipping. For the complete terms, please see our Return & Refund Policy or start a return via our RMA page.
We don't provide installation directly, but most of our parts are designed for straightforward DIY installation — the step-by-step guide is in the Installation Guide tab above. For complex parts (e.g. brakes, suspension, electrical systems), we recommend having a qualified mechanic perform the installation. If you have technical questions during installation, our support team is happy to help at support@evparts4x4.com.
