- Adjustable Telescopic Length (2nd Gen): Telescoping end sections plus a 2 cm clamp adjustment range let you dial in a precise, rattle-free fit on your factory rails — no fixed-length guesswork. (The 1st Generation is a fixed-length bar.)
- Heavy-Duty 200 kg Load Rating (2nd Gen): Rated to carry up to 200 kg (440 lb) of gear, so you can run roof boxes, bikes, cargo baskets and rooftop tents with confidence. (The 1st Generation is rated to 75 kg / 165 lb.)
- Manganese-Steel Locking Clamp (2nd Gen):A thickened, anti-rust manganese-steel clamp bites the factory side rails harder for a stronger, tighter, safer hold — and locks with the two included keys to deter theft.
- Aerodynamic Shark Profile: The low-profile 75 mm bar is shaped to cut wind noise and drag, keeping the cabin quiet and the roofline clean.
- Aircraft-Grade Aluminium Bar: Lightweight aviation-grade aluminium alloy stays rigid under load while resisting corrosion and weather for years.
- Bolt-On, No Drilling: Installs to factory raised roof rails in about 30–45 minutes with the included hex key — zero drilling or vehicle modification.
- Fits 99% of Rooftop Gear(2nd Generation): Universal T-slot mounting works with roof boxes, bike racks, cargo baskets, kayak/ski carriers and rooftop tents from all major brands.
2016-2020 Kia Sorento Luggage Rack Crossbar
Regular price
$188.99
Sale price
$188.99
Regular price
Unit price
Save
Quick Answer
60-second summary
Aluminium luggage-rack crossbars for the 2016-2020 Kia Sorento. Choose the fixed 1st Generation (75 kg) or the upgraded 2nd Generation — adjustable telescopic length, 200 kg load rating and a lockable manganese-steel clamp. Bolt-on to factory rails, no drilling.
Install time
30-45 minutes
Drilling
No - bolt-on
Warranty
Yes - non-invasive
Guaranteed Fit — Zero Purchase Risk
Verified for your vehicle. If these parts don't fit, we cover return shipping and issue a full refund. No questions asked.
Confirm this fits your vehicle
Volume Discount — More Sets, More Savings
1 Set
Standard price
$188.99
2 Sets
Save 10% — $170.09 each
$340.18
$377.98
3 Sets
Save 15% — $160.64 each ★ Best value
$481.92
$566.97
-
Estimated Delivery:Aug 27 - Aug 31
-
Free Air Express Shipping on orders over $100!
2016-2020 Kia Sorento Luggage Rack Crossbar
Precision Fit Guaranteed
Every part verified against OEM vehicle data. Guaranteed to fit your vehicle — or we cover return shipping and issue a full refund.
Engineered for EV Platforms
Parts designed for BYD, Tesla, MG, GWM, and KIA — OEM-spec quality, tested for EV electrical systems and caliper compatibility.
Your Parts, Your Terms
Split payments with Zip, Afterpay, or Shop Pay. Zero-interest options — approved in seconds at checkout, no forms required.
Features & Benefits
What's Included
Product Gallery
Confirmed compatible vehicles for this part. Use the vehicle selector above to verify fitment for your specific car.
| Year Range | Brand | Model |
|---|---|---|
| 2016-2020 | Kia | Sorento(1st Generation) |
⚠ Compatibility note
For specific model/year/variant compatibility, please send your VIN or vehicle details to support@evparts4x4.com — we'll confirm fitment within 24 hours.
Not sure about compatibility? Contact us — we'll confirm within 24 hours.
Total time
30-45 minutes
Drilling required
No - bolt-on
Warranty
Yes - non-invasive
The 1st Generation is a fixed-length aluminium bar rated to about 75 kg (165 lb). The 2nd Generation is an upgraded, adjustable design: telescoping ends plus a 2 cm clamp range for a precise fit, a higher 200 kg (440 lb) load rating, and a thickened anti-rust manganese-steel clamp that locks with the included keys. If you want maximum capacity, security and an exact fit, choose the 2nd Generation.
Yes. Your Sorento must already have the factory raised roof rails. Both generations clamp/bolt directly to those rails with no drilling or modification. If you're unsure, check your owner's manual or send us your VIN and we'll confirm within 24 hours.
The 2nd Generation is rated to 200 kg (440 lb) and the 1st Generation to 75 kg (165 lb). Important: that's the bar's own rating — your real limit while driving is whatever your vehicle's roof load rating allows (typically around 75 kg for the Sorento). Always follow your vehicle's roof limit, distribute the load evenly, and secure everything properly.
Yes. The 2nd Generation has telescoping end sections plus a 2 cm adjustment range on each clamp, so you can position the bars accurately along the factory rails and clamp them down with no rattle. The thickened manganese-steel clamp grips harder than a standard clamp for a secure, tight hold.
Yes — the 2nd Generation clamp locks and ships with two keys, so your crossbars (and anything mounted to them) are harder to remove without the key. The 1st Generation uses a standard bolt-on clamp.
You get a pair of crossbars, the mounting clamps/brackets and hardware, and installation instructions. The 2nd Generation also includes a hex (Allen) key and two lock keys, so no extra tools are needed. For the 1st Generation, a wrench or socket set is handy for final tightening.
Yes. The universal T-slot design accepts roof boxes, bike racks, cargo baskets, kayak/ski carriers and rooftop tents from all major brands — it's compatible with about 99% of rooftop gear on the market.
The low-profile 75 mm shark-style bar is shaped to minimise wind noise and drag, so empty they have very little impact on efficiency. As with any roof rack, adding a loaded box or bikes will increase wind resistance and use.
Use the vehicle selector at the top of this page to confirm fitment for your specific year, brand, and model. If your vehicle is not listed or you're unsure, contact us at support@evparts4x4.com with your VIN — we'll confirm compatibility within 24 hours. Our Guaranteed Fit policy means if a compatibility issue is on our end, we'll make it right.
Orders are processed and dispatched within 2-4 business days. Standard parts ship via Air Parcel and typically arrive in 10-15 business days; larger body parts ship via Sea Freight and take around 30-45 business days. Shipping is free on orders over $100. You'll receive a tracking number once your order ships, and can track it anytime here. Full details in our Shipping Policy.
Yes — we offer a 30-day return window from the delivery date, and we don't charge any restocking fees. If an item arrives damaged or isn't quite right on our end, we'll arrange a replacement or full refund and cover the return shipping. For the complete terms, please see our Return & Refund Policy or start a return via our RMA page.
We don't provide installation directly, but most of our parts are designed for straightforward DIY installation — the step-by-step guide is in the Installation Guide tab above. For complex parts (e.g. brakes, suspension, electrical systems), we recommend having a qualified mechanic perform the installation. If you have technical questions during installation, our support team is happy to help at support@evparts4x4.com.
