Byd Han-Ev Interior LED strips

Description

Seal more snug: plug and harness are tightly combined, refusing a gap, water mist and moisture have nowhere to hide!
Higher locking buckle, more stable: goodbye to loose shedding troubles, firmly locked, bumpy roads can also be as stable as Mount Tai, give you lasting peace of mind experience.
Widen the inner diameter of the rubber plug, full filling: the internal filling is fuller, to further strengthen the sealing effect, waterproof performance soared straight line!
IPX7 waterproof grade certification: more than just talk! After rigorous testing, it supports 1 meter water depth immersion for 30 minutes and still works normally! Whether it's washing your car, or wading in the rain, your LED light bar can be calm, long-lasting shine!
Wire and plug injection molding: avoid false connection and water vapor into the main board, more corrosion-resistant, more durable, more stable safety!
Higher block to stop the harness vibration off: effectively prevent the harness from falling off due to vibration, so that your lighting system is always stable online!

Includes(sku)

1.20-25 Byd Han EV Logo Light Up/Off with Lock/Unlock.

Installation steps

1.Open the hood: Locate the hood switch on the lower left side of the steering wheel and gently pull it to open the hood.
2.Remove the cover: Open the 7 clips on the trapezoidal cover (please refer to the included installation video for more intuitive operation).
3.Connecting the module: Transfer the light module harness directly to the original vehicle harness connector. Make sure the plugs are securely connected.
4.Inspect and WaterproofCarefully check all plugs to make sure they are plugged in properly and tightly, and pay special attention to waterproofing and make sure the connections are dry.
5.Fixing and Finishing: Install and fix the beacon control module, make sure it is not loose. Congratulations, the installation is complete!