- Takes the Hit for Your Paint: Tough elastic resin absorbs door knocks, parking dings and scrapes instead of your door panel.
- Universal Fit, Any Vehicle: Surface-mounted design fits SUVs, 4x4s, sedans, vans and pickups — you choose the placement. No model-specific bracket needed.
- Hard-Core Bolt-Look Trim: Electroplated matte-silver bolt detailing and a coarse textured surface match rugged off-road styling.
- Residue-Free Removable Tape: Pre-applied imported automotive tape holds firm through sun, rain and car washes — yet lifts off later without marking your paint. No drilling.
- Built for Weather Extremes: Resin stays flexible in cold and stable in heat, so it won't go brittle or warp.
- 10-Minute Fit: Clean, peel, press. Four guards (2 pairs), 140 × 40 × 10mm each.
Car Door Bumper Guards — Universal Anti-Scratch Protectors, 4pcs
Regular price
$25.11
Sale price
$25.11
Regular price
$28.00
Unit price
Save 10%
Quick Answer
60-second summary
Protect your paint from dings and scrapes with this 4-piece set of universal stick-on door bumper guards (140×40×10mm). Crafted from durable elastic resin with a matte finish and electroplated bolt-look trim, they perfectly complement rugged 4x4s like the Tank 300/500, Jimny, Wrangler, and Land Cruiser, while fitting almost any vehicle. Installation takes just 10-20 minutes using the pre-applied, residue-free automotive tape—no drilling required.
Install time
10-20 minutes + 24-48h cure
Drilling
No - adhesive
Warranty
Yes - non-invasive, removab...
Guaranteed Fit — Zero Purchase Risk
Verified for your vehicle. If these parts don't fit, we cover return shipping and issue a full refund. No questions asked.
Confirm this fits your vehicle
Volume Discount — More Sets, More Savings
1 Set
Standard price
$25.11
2 Sets
Save 10% — $22.60 each
$45.20
$50.22
3 Sets
Save 15% — $21.34 each ★ Best value
$64.03
$75.33
-
Estimated Delivery:Sep 20 - Sep 24
-
Free Air Express Shipping on orders over $100!
Car Door Bumper Guards — Universal Anti-Scratch Protectors, 4pcs
Precision Fit Guaranteed
Every part verified against OEM vehicle data. Guaranteed to fit your vehicle — or we cover return shipping and issue a full refund.
Engineered for EV Platforms
Parts designed for BYD, Tesla, MG, GWM, and KIA — OEM-spec quality, tested for EV electrical systems and caliper compatibility.
Your Parts, Your Terms
Split payments with Zip, Afterpay, or Shop Pay. Zero-interest options — approved in seconds at checkout, no forms required.
Features & Benefits
What's Included
Product Gallery
🔧 Universal Fit — Compatible with most vehicles
Please verify compatibility before purchase. Contact us with your VIN for confirmation.
⚠ Compatibility note
For specific model/year/variant compatibility, please send your VIN or vehicle details to support@evparts4x4.com — we'll confirm fitment within 24 hours.
Not sure about compatibility? Contact us — we'll confirm within 24 hours.
Total time
10-20 minutes + 24-48h cure
Drilling required
No - adhesive
Warranty
Yes - non-invasive, removable without residue
Yes — these are universal. Because each guard sticks to the surface rather than clipping into a model-specific bracket, they fit almost any vehicle: SUVs, 4x4s, sedans, hatchbacks, vans and pickups. You choose exactly where to place them on the door. They're especially popular on rugged SUVs like the GWM Tank 300/500, Suzuki Jimny, Jeep Wrangler, Toyota Land Cruiser and BJ40, where the bolt-look styling fits right in.
Each guard measures 140mm tall × 40mm wide × 10mm thick (about 5.5 × 1.6 × 0.4 inches). They're compact protective pads that mount where knocks actually happen — not full-length door strips. You get four in a set (2 pairs), enough for one vehicle.
Most people fit them on the widest part of the door, roughly level with the door handle, since that's the first point to contact another car or a wall. On four-door vehicles, one guard per door works well; on two-door vehicles, many owners fit two per door for wider coverage. Dry fit and stand back to check the look before peeling the backing.
No. Each guard comes with pre-applied automotive tape — clean the surface, peel and press. No drilling and no permanent modification to your vehicle.
They use imported residue-free automotive tape, designed to hold firmly through sun, rain and car washes but to come off later without leaving marks. To remove, warm the guard gently with a hair dryer and peel slowly; any remaining adhesive lifts with an adhesive remover. As with any tape, fit only to sound factory paint — not to damaged, resprayed or peeling paintwork.
A tough elastic resin with a coarse matte textured surface that resists abrasion and hides scuffs, finished with electroplated matte-silver bolt-look trim. The resin stays flexible in cold weather and stable in heat, so it won't turn brittle or warp.
The everyday stuff: door knocks in tight car parks, the neighbouring car's door, brushing a wall or post, and general scuffs along the door. They act as a sacrificial cushion at the contact point. They are not a rock-chip guard or a substitute for full paint protection film across the panel.
It grips immediately, but reaches full strength after 24-48 hours. Avoid car washes, heavy rain and off-road driving during that window. If you're fitting in cold weather, warm the door and tape with a hair dryer first for the best bond.
About 10-20 minutes for all four. Dry fit to plan placement, clean with isopropyl alcohol, peel, position and press firmly for 60 seconds.
Orders dispatch within 2-4 business days and ship via Air Parcel, typically arriving in 10-15 business days with tracking. Free shipping on orders over $100.
Yes — 30-day returns from delivery with no restocking fees. Note that once a guard's backing film has been removed and it has been stuck to the vehicle, it can't be returned as new, so please dry fit first.
Use the vehicle selector at the top of this page to confirm fitment for your specific year, brand, and model. If your vehicle is not listed or you're unsure, contact us at support@evparts4x4.com with your VIN — we'll confirm compatibility within 24 hours. Our Guaranteed Fit policy means if a compatibility issue is on our end, we'll make it right.
Orders are processed and dispatched within 2-4 business days. Standard parts ship via Air Parcel and typically arrive in 10-15 business days; larger body parts ship via Sea Freight and take around 30-45 business days. Shipping is free on orders over $100. You'll receive a tracking number once your order ships, and can track it anytime here. Full details in our Shipping Policy.
Yes — we offer a 30-day return window from the delivery date, and we don't charge any restocking fees. If an item arrives damaged or isn't quite right on our end, we'll arrange a replacement or full refund and cover the return shipping. For the complete terms, please see our Return & Refund Policy or start a return via our RMA page.
We don't provide installation directly, but most of our parts are designed for straightforward DIY installation — the step-by-step guide is in the Installation Guide tab above. For complex parts (e.g. brakes, suspension, electrical systems), we recommend having a qualified mechanic perform the installation. If you have technical questions during installation, our support team is happy to help at support@evparts4x4.com.
