- AC Inlet Coverage: Covers the matching AC inlet. On a CCS2 combo inlet, the Type 2 option covers the upper section only; the two lower DC contacts need a separate cover. Need separate covers for the upper Type 2 section and lower CCS2 DC contacts? See our BYD Type 2 / CCS2 dual-cap kit and check that product's BYD vehicle fitment before ordering.
- Flexible TPR Material: Made from thermoplastic rubber (TPR), with a shaped, flexible fit around the matching charging inlet.
- Adhesive-Free Push-Fit: The matched dimensions and flexible material hold the cap in place. No adhesive, drilling or curing time is required.
- Dust and Rain Protection: The snug cap helps keep dust, grit and rain out between charging sessions. Keep the inlet dry and remove the cap before connecting a charger.
- Three Interface Options: Choose Type 2 AC, J1772 / Type 1 AC or GB/T AC to match your vehicle. These are separate cap options, not charging adapters or one cap that fits every standard.
- Simple Daily Use: Push the matching cap into place after charging and remove it before the next charge. Check that it sits securely and the exterior charge-port door closes normally.
EV AC Charging Port Cover – TPR Cap | MG4, Type 2, J1772 & GB/T
Regular price
$19.99
Sale price
$19.99
Regular price
$29.99
Unit price
Save 33%
Quick Answer
60-second summary
Flexible TPR charging port dust and rain cover for the matching AC inlet. Choose the Type 2, J1772 / Type 1 or GB/T AC option to match your inlet shape and dimensions. The cap stays in place through its shaped push-fit; no adhesive, drilling or curing time is required. On a CCS2 inlet, the Type 2 option covers only the upper Type 2 section, not the two lower DC contacts. Remove the cap before connecting any charging plug and refit it between charging sessions.
Install time
30 - 60 seconds
Drilling
No - adhesive
Warranty
Yes - non-invasive
Guaranteed Fit — Zero Purchase Risk
Verified for your vehicle. If these parts don't fit, we cover return shipping and issue a full refund. No questions asked.
Confirm this fits your vehicle
Volume Discount — More Sets, More Savings
1 Set
Standard price
$19.99
2 Sets
Save 10% — $17.99 each
$35.98
$39.98
3 Sets
Save 15% — $16.99 each ★ Best value
$50.97
$59.97
-
Estimated Delivery:Oct 30 - Nov 03
-
Free Air Express Shipping on orders over $100!
EV AC Charging Port Cover – TPR Cap | MG4, Type 2, J1772 & GB/T
Precision Fit Guaranteed
Every part verified against OEM vehicle data. Guaranteed to fit your vehicle — or we cover return shipping and issue a full refund.
Engineered for EV Platforms
Parts designed for BYD, Tesla, MG, GWM, and KIA — OEM-spec quality, tested for EV electrical systems and caliper compatibility.
Your Parts, Your Terms
Split payments with Zip, Afterpay, or Shop Pay. Zero-interest options — approved in seconds at checkout, no forms required.
Features & Benefits
What's Included
🔧 Universal Fit — Compatible with most vehicles
Please verify compatibility before purchase. Contact us with your VIN for confirmation.
⚠ Compatibility note
Universal fit by selected AC inlet standard and dimensions: Type 2 AC, J1772 / Type 1 AC or GB/T AC. Match the cap option, inlet shape and dimensions; vehicle model alone does not establish compatibility. Not for NACS or GB/T DC inlets, mismatched inlet dimensions, or damaged charging-port housings. The Type 2 option covers only the upper AC section of CCS2, not the two lower DC contacts. Remove the cap before connecting any charging plug.
Not sure about compatibility? Contact us — we'll confirm within 24 hours.
Total time
30 - 60 seconds
Drilling required
No - adhesive
Warranty
Yes - non-invasive
Choose by the actual inlet standard, shape and dimensions, not the model name alone. The options are Type 2 AC, J1772 / Type 1 AC and GB/T AC. The European MG4 uses a Type 2 upper section in its CCS2 combo inlet; choose the matching Type 2 option rather than the GB/T option. Other markets can differ. Send an inlet photo if you are unsure.
This product is made from flexible thermoplastic rubber (TPR). Its shape and matched dimensions allow it to fit snugly onto the intended inlet.
No. It covers the upper Type 2 section used for AC charging. The two larger lower CCS2 DC contacts are separate and are not covered by this cap.
No. The TPR cap stays in place through its matched push-fit. It contains no adhesive and does not need glue, drilling or curing time. Check that it fits securely and the exterior charge-port door closes normally.
Use it between charging sessions to help keep dust and rain out of the matching inlet. Remove it before connecting any charging plug. It is not a cover for a plugged-in charger; no tested IP rating, immersion rating or pressure-wash rating is claimed here.
One TPR AC inlet cover in the interface option you select. Adhesive is neither supplied nor needed. This option does not include a separate lower CCS2 DC cover.
See the BYD Type 2 / CCS2 dual-cap charging port cover kit linked in the product description. That product provides separate covers for the upper and lower sections. Check its BYD vehicle fitment before ordering; it is not being recommended as a universal J1772, GB/T or MG4 solution.
Use the vehicle selector at the top of this page to confirm fitment for your specific year, brand, and model. If your vehicle is not listed or you're unsure, contact us at support@evparts4x4.com with your VIN — we'll confirm compatibility within 24 hours. Our Guaranteed Fit policy means if a compatibility issue is on our end, we'll make it right.
Orders are processed and dispatched within 2-4 business days. Standard parts ship via Air Parcel and typically arrive in 10-15 business days; larger body parts ship via Sea Freight and take around 30-45 business days. Shipping is free on orders over $100. You'll receive a tracking number once your order ships, and can track it anytime here. Full details in our Shipping Policy.
Yes — we offer a 30-day return window from the delivery date, and we don't charge any restocking fees. If an item arrives damaged or isn't quite right on our end, we'll arrange a replacement or full refund and cover the return shipping. For the complete terms, please see our Return & Refund Policy or start a return via our RMA page.
We don't provide installation directly, but most of our parts are designed for straightforward DIY installation — the step-by-step guide is in the Installation Guide tab above. For complex parts (e.g. brakes, suspension, electrical systems), we recommend having a qualified mechanic perform the installation. If you have technical questions during installation, our support team is happy to help at support@evparts4x4.com.
