- Custom Fit Design: Moulded 1:1 from the original 2024-2026 BYD Shark 6 bonnet. Every crease, vent slot and radius matches the factory panel, so the parts sit flush with no gaps and no wind lift at speed.
- Split 3-Piece Protector: The bonnet protector ships as a centre section plus two wings. Run all three for maximum coverage or the centre piece alone for a minimal look - your choice, at no extra cost.
- Impact-Grade ABS: Injection-moulded ABS holds shape from -40°C to 120°C and resists stone chips, bug acid, scratching, fading and UV yellowing. Rigid where PVC and acrylic go brittle.
- No-Drill Installation: Pre-applied 3M automotive-grade tape plus the bonnet's existing locating slots. No body drilling, no cutting, no removal of factory trim. Warranty-safe and fully reversible.
- Functional Louvres: The bonnet cover's side vents are open, not blanked, so under-bonnet heat still escapes and the raised centre spine channels airflow over the windscreen instead of trapping it.
- Matte Black Textured Finish: Hides dust, fine scratches and swirl marks far better than gloss, and matches the Shark 6's factory black trim, fender arches and roof rails.
- Built for Real Conditions: Sealed adhesive line, no water trap between part and paint, no rust point. Safe for automatic and high-pressure washing after the 24-48 hour cure.
- Everything in the Box: Parts arrive with tape pre-applied and protected, plus alcohol wipes, positioning aids and illustrated instructions. No trip to the hardware store.
BYD Shark 6 Bonnet Cover & Bonnet Protector | Hood Scoop Guard
Regular price
$599.00
Sale price
$599.00
Regular price
$666.00
Unit price
Save 10%
Quick Answer
60-second summary
Model-specific bonnet upgrades for the 2024-2026 BYD Shark 6: a sports bonnet cover moulded from the original hood, and a 3-piece ABS stone deflector for the leading edge. Both fit with 3M automotive tape and existing hood locating points, no drilling. Available separately or as a set.
Install time
Bonnet Cover: 30-45 minutes. Bonnet Protector (3 pcs): 15-30 minutes. Both require 24-48h adhesive cure before washing or highway driving.
Drilling
No body drilling. Both part...
Warranty
Yes - non-invasive stick-on...
Guaranteed Fit — Zero Purchase Risk
Verified for your vehicle. If these parts don't fit, we cover return shipping and issue a full refund. No questions asked.
Confirm this fits your vehicle
Volume Discount — More Sets, More Savings
1 Set
Standard price
$599.00
2 Sets
Save 10% — $539.10 each
$1,078.20
$1,198.00
3 Sets
Save 15% — $509.15 each ★ Best value
$1,527.45
$1,797.00
-
Estimated delivery:Oct 02 - Oct 06
-
Overweight products (over 10 kg) are shipped by sea freight, carefully packed and delivered by local carriers. The exact shipping time will be confirmed after order confirmation.
BYD Shark 6 Bonnet Cover & Bonnet Protector | Hood Scoop Guard
Precision Fit Guaranteed
Every part verified against OEM vehicle data. Guaranteed to fit your vehicle — or we cover return shipping and issue a full refund.
Engineered for EV Platforms
Parts designed for BYD, Tesla, MG, GWM, and KIA — OEM-spec quality, tested for EV electrical systems and caliper compatibility.
Your Parts, Your Terms
Split payments with Zip, Afterpay, or Shop Pay. Zero-interest options — approved in seconds at checkout, no forms required.
Features & Benefits
What's Included
Confirmed compatible vehicles for this part. Use the vehicle selector above to verify fitment for your specific car.
| Year Range | Brand | Model |
|---|---|---|
| 2025-2026 | BYD | Shark 6 |
Not sure about compatibility? Contact us — we'll confirm within 24 hours.
Total time
Bonnet Cover: 30-45 minutes. Bonnet Protector (3 pcs): 15-30 minutes. Both require 24-48h adhesive cure before washing or highway driving.
Drilling required
No body drilling. Both parts mount with pre-applied 3M automotive-grade tape plus the hood's existing locating slots. No cutting, no trimming, no clips into painted panels.
Warranty
Yes - non-invasive stick-on parts. Nothing is drilled, cut or unplugged, no contact with the bonnet latch, hinges, struts or any sensor, and both parts remove cleanly with heat and fishing line. Does not affect BYD's factory vehicle warranty.
Both parts are moulded from the original 2024-2026 BYD Shark 6 bonnet and fit every trim level in every market the Shark is sold in. They will not fit any other BYD model. If you are unsure, send us your VIN and we will confirm before dispatch.
No. Both parts use pre-applied 3M automotive-grade tape together with the bonnet's existing locating slots. There is no drilling, no cutting and no removal of factory trim. Nothing is unplugged and nothing touches the latch, hinges or struts.
No. These are non-invasive stick-on exterior parts. They do not alter any structural, electrical or safety component, and they remove cleanly with heat and fishing line if you ever need to return the vehicle to standard.
Yes. The protector is a 3-piece design - a centre section plus a left and right wing. Fit all three for full leading-edge coverage, or run the centre piece alone for a lower-profile look. Both are correct fitments and there is no price difference.
Yes, and that is how most owners run them. The cover sits on the upper bonnet surface and the protector wraps the leading edge, so they occupy different areas and do not overlap. Buying the set saves you 39 dollars against buying them separately.
The bonnet cover is unaffected. The bonnet protector's outer wings finish close to the headlight upper edge, so if you run aftermarket headlight protectors there may be a clearance conflict at the outer tips. Message us with a photo of your setup before ordering and we will check it for you.
The bonnet cover takes 30-45 minutes and the 3-piece protector takes 15-30 minutes, both single-person jobs with no tools beyond the supplied wipes. Allow a further 24-48 hours of adhesive cure before washing the vehicle or driving at sustained highway speed.
Yes, once the adhesive has cured for 24-48 hours. Both parts handle automatic and high-pressure washing. As with any taped exterior part, avoid holding a pressure wand directly against the adhesive edge at close range.
No. The side louvres are open rather than blanked off, so under-bonnet heat still escapes. The cover sits above the factory panel and does not seal any factory vent or intake path.
No, when removed properly. Warm the part with a hair dryer, cut the tape with fishing line or dental floss, then lift residue with adhesive remover and a plastic scraper. Factory paint in sound condition is not affected. Do not fit either part over damaged, resprayed or freshly painted panels - paint less than 30 days old has not fully outgassed and tape can lift it.
Use the vehicle selector at the top of this page to confirm fitment for your specific year, brand, and model. If your vehicle is not listed or you're unsure, contact us at support@evparts4x4.com with your VIN — we'll confirm compatibility within 24 hours. Our Guaranteed Fit policy means if a compatibility issue is on our end, we'll make it right.
Orders are processed and dispatched within 2-4 business days. Standard parts ship via Air Parcel and typically arrive in 10-15 business days; larger body parts ship via Sea Freight and take around 30-45 business days. Shipping is free on orders over $100. You'll receive a tracking number once your order ships, and can track it anytime here. Full details in our Shipping Policy.
Yes — we offer a 30-day return window from the delivery date, and we don't charge any restocking fees. If an item arrives damaged or isn't quite right on our end, we'll arrange a replacement or full refund and cover the return shipping. For the complete terms, please see our Return & Refund Policy or start a return via our RMA page.
We don't provide installation directly, but most of our parts are designed for straightforward DIY installation — the step-by-step guide is in the Installation Guide tab above. For complex parts (e.g. brakes, suspension, electrical systems), we recommend having a qualified mechanic perform the installation. If you have technical questions during installation, our support team is happy to help at support@evparts4x4.com.
