Muddy work boots, beach sand and wet shoes leave different cleaning jobs in a Shark 6. A removable liner can make that routine easier, but it cannot repair a leak, dry saturated carpet or compensate for a mat that shifts near the pedals.
This guide focuses on cabin floor mats for Australian RHD vehicles. For the separate ute tub, use our Shark 6 tub mat and cover guide. Check revised models and other delivery markets individually.
What should you check before buying Shark 6 floor mats?
If you are searching for BYD Shark floor mats, narrow the choice to the actual vehicle and use first. A material label or a photograph of a raised edge cannot establish fit, secure retention or coverage on its own.
| Check | What to look for | Why it matters |
|---|---|---|
| Driver’s footwell | Correct RHD shape around the pedals, heel area and footrest. | A similar-looking mat for another vehicle is not a fitment check. |
| Retention | Actual vehicle anchors and the mat’s corresponding documented retention arrangement. | Surface texture and weight alone do not prove that the mat stays in place. |
| Edges and coverage | Edges that sit in their intended positions without curling or intruding. | A taller lip is not useful if it interferes or allows dirt underneath. |
| Rear row | Coverage matching the rear footwells and centre area where included. | Front mats do not protect the second-row carpet. |
| Set contents | A piece-by-piece list for the selected material and bundle. | Cabin mats, carpet layers and a tub mat are different components. |
Use a driver-side installed photograph, a clear underside photograph and the fitting instructions to check the exact option. Compare the measured edge design and coverage with your footwell rather than choosing by the tallest advertised lip.
Which listed set includes cabin mats rather than only a tub liner?
The EVparts4x4 listing contains four different options. Choose the configuration rather than relying on the product’s main image or lowest displayed price.
| Listed option | Selection meaning | Confirm before ordering |
|---|---|---|
| TPE Tub Liner | External tub-floor product; not a cabin floor-mat set. | Tub configuration, existing lining and supplied coverage. |
| TPE floor mats + tub mat | Cabin-plus-tub bundle; it may appear under the label “TPE Floor Mats + Tub Line”. | All cabin and tub pieces, plus whether the carpet layers pictured are supplied. |
| XPE Floor Mats + Carpet | A different cabin material/package from the TPE bundle. | Covered areas, carpet components and how the complete set is secured. |
| TPV Carbon-Fibre Mats + Door Sills + Carpet | A separately named cabin package with a carbon-fibre-pattern appearance. | Material evidence, sill coverage and carpet-layer contents; the pattern is not proof of structural carbon fibre. |
Want TPE cabin mats as well as a tub mat?
Start with the TPE cabin-and-tub bundle, not the tub-only option. The bundle image also depicts carpet components, so obtain the exact packing list rather than assuming that every option has the same four pieces.
Only need cabin TPE mats? A separate TPE cabin-only option is not currently listed. Ask whether it can be supplied before paying for a tub component you do not need. XPE and TPV packages are different options, not interchangeable names for the TPE set.
TPE, XPE or TPV: what should you compare?
Choose by the actual construction, coverage and cleaning instructions of the selected set. The names identify different listed materials, but do not tell you the exact thickness, odour performance, chemical resistance or retention method.
- Wet or muddy use: ask whether the removable surface can be rinsed, how its edges contain debris and whether any textile layer needs separate care.
- Sandy use: consider how easily you can lift the pieces out without spilling grit into the carpet and clean underneath them.
- Carpet-style comfort: establish whether the upper layer is supplied as part of a documented combined assembly and how it attaches.
- Family use: request relevant material or emissions evidence rather than relying on “100% non-toxic” or temperature claims.
A waterproof sheet of material is not a waterproof cabin. Edges, gaps, footwear, doors and an unrelated vehicle leak can still leave moisture below a mat. No quantified mould-prevention period, carpet-repair saving or fixed service life is claimed here.
How do you check RHD fit, retention and pedal clearance?
Send the original delivery market, build date, model year and exact variant with photographs of the driver’s footwell, any retention fittings and the rear floor. Do not infer left-hand-drive suitability from a RHD listing, or assume a revised vehicle has the same floor simply because the badge is unchanged.
Check how the driver’s mat attaches before fitting it. Compare the actual vehicle anchors with the underside of the selected mat and follow its documented retention method. A general “anti-slip” description does not replace that check.
- Prepare the footwell: park and secure the vehicle, remove existing separate mats and clear dirt or loose objects.
- Identify the supplied pieces: distinguish driver, passenger and rear components. Do not force a piece into another position.
- Follow the documented retention method: match the actual vehicle fittings to the mat’s fittings. Do not cut holes, add screws or improvise clips to resolve a mismatch.
- Check the final shape: the mat should sit as designed, without curled edges or unsupported sections. Do not add loose mats on top or underneath. Use a matching upper layer only as documented for that combined set.
- Check pedal movement: with the vehicle safely secured against movement, verify clearance throughout the required pedal travel using the vehicle and fitting instructions. Ask a qualified installer if uncertain.
- Recheck before driving: confirm the mat remains secure and nothing has shifted. Stop using a mat that moves into the pedal area or prevents normal operation.
How should you clean mats after mud, sand or wet boots?
Remove the mat carefully and clean it outside the vehicle according to the selected material’s instructions. Keep textile components separate where their care requirements differ. Allow the pieces and the underlying carpet to dry before refitting.
The Australian Shark 6 owner’s handbook cautions against washing the vehicle floor and directs owners to keep carpet dry. Rinsing a removable mat outside is different from hosing the cabin floor or nearby electrical equipment.
- Shake or vacuum loose grit away from the vehicle before it spreads into the carpet.
- Use only cleaning products and methods suitable for the actual material.
- Do not apply a slippery dressing to the driving surface.
- Inspect edges and attachment areas after cleaning, then repeat the fit and pedal checks.
- If shipping curl remains, ask for the product-specific remedy; do not use uncontrolled heat or trim the piece to force fitment.
What if the carpet is damp or the mat keeps moving?
Lift the pieces and inspect rather than covering the symptom with another layer. Wet footwear, a spill, incomplete drying and a vehicle water leak are different causes. Persistent dampness or an unexplained smell needs the cause investigated; no mat is a leak repair.
| Symptom | Useful next check |
|---|---|
| Mat shifts or an edge curls | Stop using an interfering driver mat; check shape, retention, deformation and any unapproved extra layer. |
| Grit collects underneath | Inspect fit and entry points, remove debris and clean both surfaces before refitting. |
| Carpet remains damp | Identify the moisture source and dry or repair as appropriate before reinstalling. |
| An upper carpet layer bunches | Check whether it belongs to the selected set and uses the documented attachment method. |
If the carpet repeatedly becomes wet, investigate the water source before replacing the mat. For a mat that shifts, resolve the shape or retention problem before choosing a different material or adding another layer.
What should you confirm before ordering?
Request the selected material, covered areas, exact piece list, installed driver-side photographs, underside photographs, retention instructions and the payable price in your chosen currency. The default tub-only price must not stand in for the cabin bundle.
Check delivery to your postcode and the applicable return conditions before modifying or fitting any item. A claim that an accessory cannot affect vehicle systems is not a substitute for correct installation or the applicable warranty terms.
Review the TPE cabin bundle and confirm RHD retention
Send footwell photos and ask about cabin-only availability
BYD Shark 6 floor mat FAQ
Which option includes BYD Shark 6 cabin floor mats?
Select the TPE cabin-and-tub bundle for both named areas. The TPE tub-only option is for the external tub, without cabin mats. XPE and TPV options are separate material and package choices. Confirm the complete selected packing list.
Is the tub-only price the price of a full cabin set?
No. The default tub-only option does not include cabin mats. Select the cabin bundle or another documented cabin package before comparing the displayed price.
Can I order TPE cabin mats without a tub mat?
A separate TPE cabin-only variant is not currently listed. Ask whether it can be supplied rather than assuming it is available or paying for an unwanted tub component.
Do these mats use the Shark 6 factory retention clips?
Confirm the actual vehicle fittings, mat underside and instructions for the selected set. Do not assume the same retention method across all material packages; resolve any mismatch before using the driver’s mat.
Can I put new mats over the original carpet mats?
Remove existing separate mats. Do not add loose layers above or below the driver mat. If a selected set includes a matching upper carpet component, use it only as documented for that combined assembly and recheck retention and pedal clearance.
Are taller edges always better for muddy boots?
Raised edges can help contain debris, but the edge must sit correctly without curling or interfering. Compare measured coverage, fit, retention and pedal clearance together rather than choosing by an advertised lip height alone.
Can I hose the cabin floor when cleaning?
Do not treat removable-mat cleaning as permission to wash the cabin floor. Follow the BYD handbook and product care instructions, clean suitable removable pieces outside the vehicle, and dry them and the carpet before refitting.
Will the mats stop a water leak or guarantee against mould?
No. Investigate persistent dampness or water entry and address the cause. A mat cannot repair a leak or guarantee that the underlying carpet remains dry.
Are RHD and LHD floor mats interchangeable?
Do not assume so. The listing is for RHD vehicles. Match the exact vehicle, footwell shape, retention arrangement and covered areas; revised models need their own confirmation.
Are the pictured carpet layers included with the TPE bundle?
The bundle image depicts carpet components, but the current name and shared packing list do not resolve their inclusion. Obtain a written piece list and matching photograph before ordering.